TOOLS NEEDED FOR ASSEMBLY
Crosshead screwdriver, 10mm spanner.
ROTISSERIE COMPONENTS
Rotisserie Motor
Rotisserie
Bracket
ASSEMBLING THE ROTISSERIE ROD WITH PRONGS
Slide the prongs into the rotisserie rod. Slide in the alignment collar with screw on the threaded end, use the round nut, counter weight, nut
and then rotisserie handle in this order. Slide the alignment collar without screw on the spike end of the rotisserie rod.
546006.A.1 (GER) - June 2018
ROTISSERIE ASSEMBLY INSTRUCTIONS
Alignment Collar
Rotisserie
Rod
Prongs
Counter weight
washers
Alignment Collar
Counter
with screw
weight
Rotisserie
Rod Handle
33