Designated Use; Responsibilities Of The User - Abicor Binzel TIG ABITIG WH Serie Betriebsanleitung

®
ABITIG WH
1 Identification
1.1 CE marking
2 Safety

2.1 Designated use

2.2 Responsibilities of the user

TIG welding torches are used in industry and in the trade for inert gas welding
using tungsten electrodes and inert gases. This range can be used in all
welding positions. TIG welding torches are available in liquid-cooled models.
The liquid-cooled model requires a coolant recirculator. These operating
instructions only describe TIG welding torch ABITIG
torches may only be operated using original ABICOR BINZEL spare parts.
This device fulfils the requirements of the relevant EU directives.
Conformity is confirmed by the CE marking on the device.
The enclosed safety instructions must be observed.
• The device described in these instructions may be used only for the
purpose described in these instructions in the manner described. In doing
so, observe the operating, maintenance and servicing conditions.
• Any other use is considered contrary to the designated use.
• Unauthorized conversions or power increase modifications are not
allowed.
• Keep the operating instructions within easy reach at the device for
reference and enclose the operating instructions when handing over the
product.
• Putting into operation, operating and maintenance work may only be
carried out by qualified personnel. Qualified personnel are persons who,
based on their special training, knowledge, experience and due to their
knowledge of the relevant standards, are able to assess the tasks assigned
to them and identify possible dangers (in Germany see TRBS 1203).
• Keep other persons out of the work area.
• Please observe the accident prevention regulations of the country in
question.
• Ensure good lighting of the work area and keep the work area clean.
1 Identification
®
WH. TIG welding
EN - 3