Olivetti d-Copia 12 Kopiererbedienungsanleitung Seite 5

1 Exposure mode selector key and indicators
Use to sequentially select the exposure modes:
AUTO, MANUAL ( = ) or PHOTO (
mode is shown by a lit indicator (p. GB-8).
2 Light ( { ) and dark ( ) keys and exposure indica-
tors
Used to adjust the MANUAL ( = ) or PHOTO (
exposure level. Selected exposure level is shown by
a lit indicator (p. GB--8).
Use to start and terminate user program setting
(p. GB-12).
3 Alarm indicators
q : Developer replacement required indicator
(p. GB-16, GB-17).
t : Misfeed indicator (p. GB-14).
s : Toner cartridge replacement required indicator
(p. GB-12, GB-17).
p : Maintenance indicator (p. GB-16).
4 Copy ratio selector key and copy ratio indicators
Use to sequentially select prset reduction/enlarge-
ment copy ratios.
(p. GB-9).
5 Zoom indicator (p. GB-9)
6 Copy ratio display (%) key (p. GB-9)
7 Display
Displays the specified copy quantity, zoom copy
ratio, user program code, and error code.
Downloaded from www.Manualslib.com
). Selected
manuals search engine
8 ON LINE indicator
Lights up when the machine is used as a printer or
when it is receiving or processing print data.
9 Power save indicator
Lights up when the copier is in a power save mode
(p. GB-11).
)
0 Zoom keys ( N , L )
Use to select any reduction or enlargement copy
ratio from 50 to 200% in 1% increments (p. GB-9).
q Copy quantity keys (
• Use to select the desired copy quantity (1 to 99)
(p. GB-8)
• Use to make user program entries. (p. GB-12)
w Clear key ( > )
• Press to clear the display, or press during a copy
run to terminate copying (p. GB-8).
• Press and hold down during standby to display the
total number of copies to date (p. GB-17).
e Print key and ready indicator (
• Copying is possible when the indicator is on.
• Use to set a user program.
, )
)
GB-3