Product-Specific Safety Instructions - Simons Voss Technologies WaveNet LockNode Cable Kurzanleitung

2. Product-specific safety instructions

2. Product-specific safety instructions
CAUTION
Risk of electric shock due to live components
There is a risk of electric shock from live compon-
ents during connection.
Disconnect the device from the power supply

before connecting.
IMPORTANT
Damage caused by solar radiation
The device can become very hot due to direct sunlight.
Position the device so that the sun cannot shine directly

on the device.
Interference caused by poor shielding
The shielding of your connecting cable attenuates incoming
and outgoing interference from the cable.
1. Connect the shields between the cable sections to the
LockNodes (see
2. Connect the shields at a common point to ground po-
tential (PE).
Connections [} 24]
22 / 112 | EN
).