Installation
Installation
NOTE:
The central power supply supplies up to two devices with a voltage of
The maximum permissible current consumption per device is
Power
Out 1
Out 2
12VDC/1.5A
Power Out 1:
Use a power loop cable to connect a compatible device (
Power Out 2:
Use a power loop cable to connect a compatible device (
12VDC/3.0A
Connect one of the table power packs (
Main:
Connect one of the table power packs
Red.
Start-up
Connect at least one of the table power packs with a power socket.
4 · G&D MultiPower-2-12V
Out
In
1
Main
2
Red.
In
Main
Red.
Main
Red.
12VDC/3.0A
Status
Output
.
12 V/4.75 A)
.
(12 V/4.75 A)
12 Volt
.
1.5 A
12 VDC/1.5 A)
.
12 VDC/1.5 A
).
.