Introduction; Scope Of Delivery - Guntermann & Drunck MultiPower-2-12V Installationsanleitung

Introduction

The central power supply
. The maximum permissible current consumption per device is
12 Volt
Power
Out 1 Out 2
12VDC/1.5A
Use a power loop cable to connect the Mini-DIN 4 sockets of the two connectable
devices to a Mini-DIN 4 socket of the central power supply.
Main
12VDC/3.0A
At least one external power supply (table power pack) supplies the voltage of the
central power supply. A second, external power supply ensures uninterrupted opera-
tion if one of the two external power supplies fails.

Scope of delivery

 1 × central power supply
 2 × table power pack (
 2 × power loop cable
 1 × manual
MultiPower-2-12V supplies up to two devices with a voltage of
Status
Out In
1 Main
2 Red.
Output
In
Main
Red.
Red.
12VDC/3.0A
MultiPower-2-12V
)
12 V/4.75 A
Introduction
.
1.5 A
G&D MultiPower-2-12V · 3