Switching Between °C And °F - Omron Gentle Temp 520 Anleitung

MC-520-E_A_M_main.book Page 4 Monday, April 16, 2018 5:03 PM
2. Preparation
2.1
Removing the Insulating Tape
Pull the insulating tape out from the battery compartment by catching
hold of the outer part for the first time.
2.2
Switching between °C and °F
This unit is set in °C as default.
1.
While the power is off, press and hold the START button.
2.
While holding it down, press and hold the
ON/MEM button until °F appears on the
display with 2 beeps.
Notes:
• To select the °C mode, start from step1.
• When the unit is switched between °C and °F, all the readings stored in the
memory are deleted.
4