Herunterladen Inhalt Inhalt Diese Seite drucken

Prior To First Use - Inventum ST308WZA Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

3

prior to first use

Follow these instructions when using the vacuum cleaner for the first time: Carefully remove the vacuum cleaner and all accessories
from the packaging. Remove all packaging material and any promotional stickers. Keep the packaging (plastic bags and cardboard) out
of reach of children. After unpacking the appliance, carefully check it for external damage that may have occurred during transport.
Place the vacuum cleaner on a sturdy, dry and flat surface.
4
assembly
Make sure the plug of the vacuum cleaner is not inserted in a socket when (dis)assembling accessories or parts.
HOSE
Connecting the hose to the vacuum cleaner: insert the end of the hose in the hose connection on the vacuum cleaner and turn
it clockwise with a firm twist until you hear a click sound.
Disconnecting the hose from the vacuum cleaner: check that the plug is not in a power socket. Turn the end of the hose counter-
clockwise to disconnect it from the vacuum cleaner.
HANDLE WITH REMOTE CONTROL
By means of the ergonomic remote control on the handle, you are able to switch the vacuum cleaner
on and off and control the suction power. In order to be able to control the vacuum cleaner with the
remote control, you must first switch on the vacuum cleaner with the on/off button
cleaner itself.
1. Open the battery cover on top of the handle and place the batteries. Note the indications for the +
and - pole.
2. Control the suction power with the + and - button. The active modes on the vacuum cleaner light up.
3. Press the on/off button
TELESCOPIC TUBE
1. Insert the handle of the hose in the telescopic tube, until it snaps in place.
2. Adjust the telescopic tube to the required length. Slide the button at the top of the tube upwards and pull the lower section
of the tube to make it longer. When you let go of the sliding button, the tube will snap in place at the required length.
3. Attach the floor nozzle by sliding the tube firmly into the floor nozzle.
4. Disconnect the hose from the tube by pressing the button of the snap-on system and pulling out the handle of the hose
at the same time.
ACCESSORIES
For the benefit of the different cleaning objectives, attach the accessories to the tube or handle of the hose by sliding it firmly on the
tube or the handle.
1. Round brush nozzle: for cleaning hard furniture surfaces, corners of ceilings or blinds.
2. Furniture nozzle: for cleaning mattresses, seats and cushions.
3. Crack nozzle: for cleaning skirting boards, corners and small areas that the round
brush nozzle cannot reach.
4. Parquet brush: the parquet brush is provided with real natural hair. The long soft hairs prevent scratches
on the floor. The parquet brush is suitable for parquet floors, laminate or wood floors and all other
smooth and hard floors.
to switch off the vacuum cleaner or switch it on again.
on the vacuum
1
2
3
1
2
3
4
17
English

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis