Before First Use; Assembly - Inventum STS725RC Gebrauchsanleitung

3

before first use

Follow these instructions when using the vacuum cleaner for the first time: Carefully remove the vacuum cleaner from the packaging
and remove all traces of packaging from the device and any promotional stickers. Keep the packaging (plastic bags and cardboard)
out of the reach of children. After unpacking the vacuum cleaner, check the device for external damage that may have occurred
during transport. Place the vacuum cleaner on a secure, dry and level surface.
It takes 5 hours or so to fully charge the battery before the first use.
4

assembly

The following parts can be found in the giftbox:
a. Turbo brush
b. Tube
c. Hand vacuum cleaner
d. Wall mounted hook
e, Battery
f. Adaptor
g. Combination crevice nozzle
h. Upholstery nozzle
a
INSTALLING THE BATTERY
Install the battery in the body of the vacuum cleaner according to the picture. Make sure it locks in
properly.
CONNECTING AND DISCONNECTING THE TURBO BRUSH
Align the connection of the turbo brush with the connection of the tube and connect the two
parts.
Press the button [8] to disconnect the turbo brush.
CONNECTING AND DISCONNECTING THE TUBE
Align the connection of the hand vacuum cleaner with the connection of the tube and connect
the two parts.
Press the button [6] to disconnect the hand vacuum cleaner.
18
• English
b
h g
c
d
e
f