Low Battery Warning - Sonik GIZMO Bivvy Bedienungsanleitung

FUNCTIONS IN USE
When activated by an alarm head the GIZMO® Bivvy Light will replicate the
alarm head activation. The volume, brightness and delay time will be as se-
lected by the user. After activation, the light will return to standby mode. The
light will remember its channel, colour, volume, brightness and delay settings
even if the battery is disconnected or removed.

LOW BATTERY WARNING

The GIZMO® Bivvy Light will auto detect the battery voltage in standby mode.
When a low voltage is detected the Centre LED will flash 5 times red colour
once every ten minutes to signal a low battery. Batteries should be replaced
within 24hrs.
NOTES
The Alarm sync feature of this bivvy Light is compatible only with other
selected Sonik bite alarms.
Each main receiver will only respond to paired transmitters.
To save battery life; the light should be powered off when not in use. Please
remove the battery when unit is not being used for extended periods of time.
Use of good quality alkaline batteries is recommended for best performance.
LIGHT TECH SPECS.
Battery Type: AAA
Nominal voltage: 1.5V x 3
Power off current consumption 0mA
Standby current consumption 0.025mA
Peak working current: 160mA
Wireless transmission Type: AM
Radio transmitter operating frequency: 433MHz