Technical Data; Conformity; Standards; Type Label - Berker 2000 Schnellstart

5

TECHNICAL DATA

5.1

Conformity

The device conforms to the EC directives as per the EC Declara-
tion of Conformity (if applicable).
5.2

Standards

The applied standards, which are used to demonstrate conform-
ity with the directives, are listed in the EU type examination certi-
ficate and/or the EU Declaration of Conformity (if applicable).
5.3

Type label

Control function
Seal material
Type
Manufacture code (coded)
Fig. 1: Example of a type label
8 english
Flow coefficient
Medium pressure
Medium temperature
For derating, please refer to the
operating instructions.
Order number
Flow direction
Type 2000
Technical data
5.3.1 Designation of the actuator size
Actuator size [mm]
ø40
ø50
ø63
ø80
ø100
ø125
Tab. 1: Designation of the actuator size
5.4

Operating conditions

Degree of protection IP67 according to IEC 529 / DIN EN
60529
Flow media Water, alcohols, oils, fuels, hydraulic
fluids, saline solutions, lyes, organic
solvents, vapour, air, neutral gases
Control media Neutral gases, air
Sound pressure level <70 dB(A)
The sound pressure level may be
higher depending on the usage condi-
tions
Designation
C
D
E
R
G
H