Berker 2000 Schnellstart Seite 6

DANGER!
Electric shock due to installed electrical component.
▶ Before working on the device or system, switch off the power
supply. Secure against reactivation.
▶ Observe the applicable accident prevention and safety regula-
tions for electrical devices.
WARNING!
Risk of injury when opening the actuator.
The actuator contains a spring under tension. When the actuator
is opened, the spring will jump out and may cause injuries.
▶ Do not open the actuator.
WARNING!
Risk of injury due to moving parts.
▶ Do not reach into openings in the device.
WARNING!
Danger of burns and risk of fire.
Quickly switching actuators or hot medium may cause the sur-
face of the device to become hot.
▶ Only touch the device while wearing protective gloves.
▶ Keep the device away from highly flammable substances and
media.
6 english
Type 2000
Basic safety instructions
WARNING!
Danger due to loud noises.
Depending on the usage conditions, the device may generate
loud noises. Detailed information on the probability of loud
noises is available from the respective sales department.
▶ Wear hearing protection when in the vicinity of the device.
WARNING!
Discharge of medium if packing gland worn.
▶ If media are hazardous, safeguard the environment around the
discharge point.
To prevent injuries, observe the following:
▶ Secure device or plant to prevent unintentional activation.
▶ Only trained technicians may perform installation and main-
tenance work.
▶ Perform installation and maintenance with suitable tools only.
▶ Heavy equipment must only be transported, assembled, in-
stalled or dismantled with the help of a second person as ap-
propriate and using suitable apparatus.
▶ Following interruption of the process, ensure that the process
is restarted in a controlled manner.
Observe sequence:
1. Apply electrical or pneumatic supply.
2. Charge with medium.