Pressure Ranges; Mechanical Data; Installation; Safety Instructions Installation - Berker 2000 Schnellstart

5.4.2

Pressure ranges

Actuator material Actuator size [mm]
PA ø40...ø100
ø125
PPS ø40...ø80
ø100...ø125
Tab. 6: Maximum pilot pressure
5.5

Mechanical data

Actuator size See type label
Installation position any, preferably actuator face up
Materials and ports
see data sheet or operating instructions
12 english
6
Max. Pilot pressure
6.1
[bar]
10
7
Risk of injury from high pressure and discharge of medium.
▶ Before working on the device or system, switch off the pres-
10
sure. Vent or drain lines.
7
Risk of injury due to improper installation.
▶ Only trained technicians may perform installations.
▶ Perform installations with suitable tools only.
Risk of injury due to unintentional activation of the system and
uncontrolled restart.
▶ Secure plant to prevent unintentional activation..
▶ Ensure that the plant starts up in a controlled manner only.
For control function I: Danger due to the control pressure fail-
ing.
If the control pressure fails, the valve remains in an undefined
position.
▶ For a controlled restart, pressurize the device with control
pressure and then connect the medium.
Type 2000

Installation

INSTALLATION

Safety instructions installation

DANGER!
WARNING!
WARNING!
DANGER!