HEYLO AC 25 Bedienungsanleitung Seite 22

Cooling mode
•
Press the "MODE" button until the "COOL" display lights up.
•
Use the "DOWN" and "UP" button to set the desired room temperature (16 °C to 31 °C).
•
Press the "SPEED" button to set the fan speed.
Heating mode
• Press the "MODE" button until the "HEAT" display lights up.
• Use the "DOWN" and "UP" buttons to set the desired room temperature (16 °C to 31 °C).
• Press the "SPEED" button to set the fan speed.
Drying mode
• Press the "MODE" button until the "DEHUMIDIFY" indicator lights up.
• Set the desired room temperature to 2 °C below the current room temperature (16 °C to 3 1
°C).
• Set the fan speed to "LOW".
Ventilation mode
• Press the "MODE" button until the "FAN" display lights up.
• Press the "SPEED" button to set the fan speed.
Timer setting
In the timer setting, you can select whether the unit starts up or goes off after a desired number of hours.
The unit switches on automatically after a certain time interval:
• The air conditioner must be switched off for this. Now press the "TIMER" button and use the
"DOWN" and "UP" buttons to select the number of hours (0 - 24 h) after which the unit should
start automatically.
• Press the "TIMER" button again to confirm
• The "TIMER" indicator now lights up.
The unit switches off automatically after a certain time interval:
• The air conditioner must be switched on for this. Now press the "TIMER" button and use the
"DOWN" and "UP" buttons to select the number of hours (0 - 24 h) after which the unit should
switch off automatically.
• Press the "TIMER" button again to confirm
• The "TIMER" indicator now lights up.
1 Signal strength
2 Cooling
3 Drying
4 Fan
5 Heating
6 Automatic swing operation
7 Time setting
8 Timer on/off
9 Night mode
10 Fan speed
11 Temperature display
22
EN