CSS AssistX AS one Gebrauchsanweisung Seite 24

24 | Instructions for Use
Discard/change settings:
To see the current setting of sensitivity, tone range or hold time, press the cor-
responding button.
• starting changes
By repeated pressing of the corresponding button, you can move through
the whole adjustment range. The
after the button is released, the
• enter changes
Press the button while the
AS one confirms with a longer sound. The new value has been accepted.
• discard changes
Leave the button released until the blinking
AS one keeps on using the last saved setting and confirms with the buz-
zer sounding short.
10. Maintenance / Review
The device must be checked for safety and functionality at regular intervals.
The check must be done by trained specialist personnel only. The following
should be checked:
• functional test
• Connectors for damage and soiling
• Damage to the housing
11. Support
If you need any support or for technical questions about the product, please
contact the reseller where you purchased this product. If necessary, e. g. the re-
seller is not available or cannot help, send us an email to support@csslabs.de.
Please be sure to include a description of the problem and the serial number
of the device.
AssistX AS one
1
LED shows the actual setting. 1 sec
1
LED starts blinking for 2 sec.
1
LED is blinking to save the new setting.
1
LED turns off after 2 sec.