CSS AssistX AS one Gebrauchsanweisung Seite 23

Impulse Mode:
Users who can hold a sound only for a very short time, can use the impulse
mode. Then AS one triggers immediately when the detected sound reaches
the adjusted volume. There is neither a holdtime nor a frequency range. AS
one triggers immediately when the detected sound reaches the adjusted volu-
me. There is neither a holdtime nor a frequency range.
Teach in sound preset:
can be adapted to the users vocal capabilities. The user hums
AssistX AS one
for 1.5 sec. The frequency of the sound sample is saved as the frequency basic
setting. Additionally the tolerated deviation from the preset frequency can be
adjusted. (tone range)
• start recording (teach default settings)
Press and hold the
same time. Release both buttons (the order is arbitrary). The device con-
firms with a beep.
• recording sound
When the sound stops, the
samples the sound that comes with its integrated microphone: Start your
humming noise now.
• finishing recording
If the soundsample came with enough volume, the
green and the frequency of the soundsample is saved. In case of a very
weak soundsample the
setting remains unchanged.
Settings of Sensitivity, tone range & hold time:
The settings of the AS one can be displayed and set by using the buttons.
When setting the sensitivity, tone range and holding time, the
the selected setting range with a color code.
time button [ ] and
5
LED lights up blue for 1,5 sec. AS one now
1
LED lights up yellow and the Frequency pre-
1
Instructions for Use
AssistX AS one
range button [
7
LED lights up
1
LED indicates
1
| 23
EN
] at the