Searching A Track; Programmed Playback - Telefunken Rc1002Bm Bedienungsanleitung

6. CD OPERATION
6.3

Searching a track

„
During playback, titles can be searched using the
EN
Key
For MP3 CD
MEM/DIR/10-
or
MEM/DIR/10+ (8, 39)
6.4

Programmed playback

„
The appliance can program up to 20 tracks for CD discs and 99 for MP3-CDs in any
desired order.
Step
1. Press
2. Press MEM P-MODE (3, 30) on the main unit or
3. Press the
4. Press the MEM P-MODE (3, 30) to JVUÄYT
5. Repeat steps 2-4 to save additional tracks into
6. Press
(IM_for_approval)953-000067_RC1002BM_GB_V03_080115_2010955.indd 30
Press key Description
(18, 40)
(19, 42)
(18, 40) Several
or
(19, 42) times.
(18, 40) Press and
or
(19, 42)
(4, 39)
Press and
(12, 43) on the main unit or on the
remote control to stop playback.
on the remote control.
(19, 42) or
select desired track.
selected track and save it into the program
memory.
the program memory.
The program is full after memorizing 20 tracks
(Audio CD) or 99 tracks (MP3-CD).
(17, 41) on the main unit or on the
remote control to start playback after all the
desired tracks have been programmed.
1 x Skip to the beginning of the next track.
1 x Skip to the beginning of the current track.
2 x Skip to the beginning of the previous track.
Press until the desired track number is shown
on the display (23). The playback starts playing
the chosen track.
Press and hold to fast forward/backward in
VYKLY [V ÄUK a particular position within a track.
hold. Let go when you reach the desired position.
Playback will now continue from this position.
1 x Press to skip 10 tracks forward / backwards.
Press and hold to skip to the previous / next
hold. folder.
(18, 40) keys to
30
(19, 42) or (18, 40) keys.
Display
CD
Total number of tracks
Total playing time
PROG
and blinking
Blinking track number e.g. .
The next list number to be
programmed appears and
blinks: .
PROG
Track number and elapsed time
1/9/15 8:35 PM