Herth+Buss ELPARTS 95980652 Bedienhinweis Seite 12

Operating Instruction
Testing the trailer socket
www.herthundbuss.com
Start screen
1
This screen appears when you switch on the
remote control. Connect the trailer tester
(using the appropriate adapter if necessary)
either on the vehicle or on the trailer.
Press the logo. The device will switch to the
next screen with a acoustic signal.
Note:
Please switch on the trailer tester before
the remote control. Otherwise, a frequented
acoustic signal will sound and a prompt (See
fig. 6 on page 15) will appear to switch on the
trailer tester.
Selecting the test mode
2
In this screen, you can choose between the
test modes "VEHICLE" and "TRAILER". The
selection is marked in red. Press the arrow
button to progress to the next screen.
:
:
No connection
Connected
95980652
12