Front Panel - Cisco 350 Serie Kurzanleitung

Cisco 350 Series and Cisco 350XG Series
5
Switch Features
This section describes the exterior of the switch to help familiarize you
with your switch.

Front Panel

The ports, LEDs, and Reset button are located on the front panel of the
switch as represented in the following illustrations.
SG350XG-48T
SF350-48MP
SG355-10P
Front Panel Ports
USB Port—The USB port connects the switch to a USB device so that you
can save and restore the configuration files, firmware images, and
SYSLOG files through the connected USB device.
RJ-45 Ethernet Ports—The RJ-45 Ethernet ports connect network devices,
such as computers, printers, and access points, to the switch.
60-Watt PoE Ports—Highlighted in yellow, the 60-Watt PoE ports double
the PoE power to 60W.
SFP+ Port (if present)—The small form-factor pluggable plus (SFP+) are
connection points for modules so that the switch can link to other switches.
These ports are also commonly referred to as mini 10GigaBit Interface
Converter ports. The term SFP+ will be used in this guide.
• The SFP+ ports are compatible with Cisco modules MGBSX1, MGBLH1,
MGBT1, MGBLX1, MGBBX1, as well as other brands of modules.
• The Cisco SFP+ 10G optical modules that are supported in the Cisco
switches are: SFP-10G-SR, and SFP-10G-LR.
12 Cisco 350 Series and the Cisco 350XG Series Managed Switches