Emptying The Water Tank - ProBreeze PB-13 Bedienungsanleitung

Features
This dehumidifier uses Peltier Technology (no compressor) making it lightweight
and quiet. It is perfect for small rooms and poorly ventilated areas such as
wardrobes, cabinets and storage rooms that are susceptible to damp odours
and fungus. Using this dehumidifier will help eliminate unwanted moisture from
the air.
Switching On
1. Place the appliance on stable and level surface. Connect the power adaptor to
the nearest mains wall socket.
2. Switch the dehumidifier ON using the ON/OFF switch. The green LED will
illuminate and you should feel a light breeze blowing out of the dry air outlet.
3. To switch OFF, press the ON/OFF switch again.

Emptying the water tank

The dehumidifier can collect up to 500ml (18oz) of water per day and the tank
has a maximum capacity of 1500ml (52oz). When the tank is full, the LED will
turn YELLOW and the unit will turn off.
1. When full, turn OFF the dehumidifier and simply pull the water tank out.
2. Place the water tank a stable surface and remove tank cover using thumb
hole and following instructions below.
05 | English