Noxon iRadio 1 Bedienungsanleitung Seite 28

NOXON iRadio 1
You may choose (Manage) specific network if you have setup more than one network
connection within an area.
Check Network when Power On
Enable / disable WiFi network.
When you enable the WiFi network, the system will automatically search the available
AP. Select you desired SSID. Enter WEP or WPA code to connect the WiFi.
If the wireless network connection failed or is not in reception range, the icon at the top
left corner will have a cross on it.
Date & Time
Setup the date and time; set time format display as 12 Hour or 24 Hour; set date format
in the positions of YY (year), MM (month) and DD (day) – YY/MM/DD, DD/MM/YY or MM/
DD/YY.
Turn on/off the Daylight Saving Time (DST).
With a wireless network connected, GMT (+00:00) time is a time reference of time set-
ting. Increase or decrease the hour offset according to your time zone when you set the
time.
Dimmer
Configure the brightness of the display's backlight.
Select „Power Saving" to set the brightness of backlight in standby mode, and select
„Turn On" to set that in operation mode.
Power Management
Configure to go to standby mode automatically in the menu with or without Wifi signal.
Choose the power management timer (5/15/30mins) to set the duration of the radio to go
to standby mode automatically when you are not controlling it.
Choose "Turn off" to ignore the power management function.
Sleep Timer / Timer
Turn off or set the sleep timer to 15/30/60/90/120/150/180 minutes. Once the time is
set, there will be a bed icon with remaining minutes at the top right corner and NOXON
iRadio will turn to standby after the given duration. Press Sleep on the remote control for
the shortcut of this function.The timer can be set to a time between 99:59 and 00:01 and
choose to serve as as countdown or „Hourglass"
Buffer
Configure the buffer time of the music playback, 2/4/8 seconds.
28