Operation; Maintenance; Environmental Protection; Declaration Of Conformity - Kress KUX35P Bedienungsanleitung

OPERATION

1. START/STOP
Press the start/stop switch to start the machine.
Release the start/stop switch (6) to stop the machine.
2. CONTINUOUS OPERATION
Start: Press the start/stop switch (6) and lock the switch
with the self-locking button (5) to keep it activated.
Off: Press the start/stop switch (6) and release it
immediately.
Warning: If the machine is severely hot,
make your machine run for 2-3 minutes
without load to cool the motor.

MAINTENANCE

Be sure to unplug the power cord before any
repair work on the machine.
It is required to add the lubricants for the power tool.
Wipe the machine with a dry cloth in time after using.
Do not clean the machine with water or chemical
detergent to avoid affecting the performance of the
casing or causing such accident as electric leakage.
Always keep the air inlet clean and unobstructed to
prevent debris from accumulating and affecting the
cooling of the motor. Also, try not to use it in dusty
environment.
Occasionally, there may sparkles at the air outlet, which
is normal and will not cause damage to the machine.
If the power cord is damaged, it must be replaced
8
by the manufacturer, a special service center, or an
professional person with equivalent qualifications to
EN
avoid a hazard.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities
or retailer for recycling advice.
PLUG
REPLACEMENT(ONLY
FOR REWIRABLE PLUG
OF UK & IRELAND)
If you need to replace the fitted plug then follow the
instructions below.
IMPORTANT
The wires in the mains lead are colored in accordance
with the following code:
BLUE =NEUTRAL
As the colors of the wires in the mains lead of this
appliance may not correspond with the colored
markings identifying the terminals in your plug, proceed
as follows. The wire which is colored blue must be
connected to the terminal which is marked with N. The
BROWN = LIVE
wire which is colored brown must be connected to the
terminal which is marked with L.
Warning!
Never connect live or neutral wires to the earth terminal
of the plug. Only fit an approved 13ABS1363/A plug
and the correct rated fuse.
Note: If a moulded plug is fitted and has to be removed
take great care in disposing of the plug and severed
cable, it must be destroyed to prevent engaging into a
socket.
Connec t
Blue to N
(neutral)
Outer sleeve
firmly clamped
DECLARATION OF
CONFORMITY
We,
Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product
Description Electric hammer
Type KUX35P(X35P-designation of machinery,
representative of hammer)
Function Hammering various materials
Complies with the following Directives:
2006/42/EC, 2011/65/EU&(EU)2015/863,
2014/30/EU
2000/14/EC amended by 2005/88/EC:
- Conformity Assessment Procedure as per Annex VI
- Measured Sound Power Level 101.9dB
- Declared Guaranteed Sound Power Level 105dB
Standards conform to
EN 60745-1, EN 60745-2-6, EN ISO 3744,
EN 55014-1, EN 55014-2, EN 61000-3-2, EN
61000-3-3
The person authorized to compile the technical file,
Name Marcel Filz
Address Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
2020/05/25
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
Fuse
Brown L (live)
Cable grip