Herunterladen Diese Seite drucken

KED CYCLE & RIDE Gebrauchsanleitung Seite 11

Certified helmet
Vorschau ausblenden Andere Handbücher für CYCLE & RIDE:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
7. Extras
7.1 Lighting
The Quicksafe is equipped with flashing lamps. You can switch the light
on and off by pressing (see figure 6).
Battery change: use a narrow flat screwdriver to open the housing (see
figure 7), remove the board and replace the batteries.
***Quicksafe adjustment system with turn signals not available on all models***
8. Care, cleaning and storage
The comfortable padding can be cleaned with a moist cloth. A mild soapy
solution or diluted delicate washing powder can be used as a detergent.
The padding and straps should be dried at room temperature.
The shell of the helmet should be cleaned with lukewarm water and a
mild soapy solution. Do not use any solvents such as thinners or similar
products.
Excessively high temperatures or strong UV rays can damage your hel-
met. It should therefore not be stored in temperatures above 60° C, such
as on the back shelf of a car. Do not place it on or near to a source of
heat such as an oven. The helmet should simply be kept in a dry place.
The helmet should be checked for visible defects at regular intervals. Mi-
nor scratches do not affect your helmet's level of protection.
Only original parts should be used for repairs.
Please consult your dealer
9. Safe use
This helmet is only suitable for equitation and for the bicycle and roller
skating. For other sports such as motorcycle and Mofafahren he is not
suitable.
Check your helmet for a correct t before setting off. The clip system on
he chin strap must be fully closed. The straps must be closely tted.
Please check the helmets of any children accompanying you.
Do not draw or paint on the helmet and do not apply stickers. The inks,
paints and glues may contain components that have a negative in uence
on the stability of your helmet and its protection level.
Do not make any alterations to the helmet shell. Do not drill into it or screw
on any objects.
As a result of a fall or a heavier impact, the protection level of the hel- met
shell can be adversely affected, even if no external damages can be identi
ed. Therefore, always replace the helmet and never use one involved in
an accident! A helmet should be used 3-5 years depending on the intensi-
ty of use Use to be exchanged. The maximum life, without
Usage is 8 years from the date of manufacture, which is in the helmet
is marked..
11

Werbung

loading

Verwandte Produkte für KED CYCLE & RIDE