Specification; Feartures - Scantool 220 GSHT Gebrauchsanweisung

2. SPECIFICATION

MOTOR
Saw Blade Speed
Blade Size (mm)
Dimension Lx W x H (mm)
Packing
Cutting Capacity

3. FEARTURES

1. This machine is useful for cutting steel, steel pipe, and provides cutting angle at
+0* and +45* by the swivel head
2. A tooth selection chart was provided on the machine for cutting reference.
3. Variable speed control gives convenient selection of speeds (This machine comes
with a standard 2-speed motor. But can be purchased with a DC driven motor as
an option.)
4. This machine is using manual cutting by pulling down the saw bow by hand.
Start(press) button is located at the handle of the saw bow. Motor stops when
button was released.
5. Stability of the machine, plus working table height is 950 mm, conforming to human
engineering.
6. The one-inch blade and carbide guide provide better result of the cutting surface
and efficiency.
7. The one-piece casting and one time CNC processing provide better rigidity and
precision of the machine.
8. The one-piece and full coverage blade cover conforms to CE stipulation. Well
coolant fluid collection system provides clean and dry, and safety of the working
area.
9. Chip pan underneath the working table prevents coolant fluid leaking and keep
floor dry.
10. Coolant for cutting, water : oil = 40 : 1 oil specification.
2 speed Motor
N.W / G.W (Kgs)
Measurement
Sets per
20`CTNR
0*
+45*
60 Hz
50 Hz
20 x 0,9 x 2085
1280 x 510 x 1370
170 / 195
1220 x 560 x 750
52 sets
O (mm/Inch)
(mm/inch)
O (mm/inch)
(mm/inch)
Scantool 220 GSHT
1 HP
42 ~ 84 MPM
35 ~ 70 MPM
180 / 7"
180 x 180 /" x 7"
1150/ 4,5"
110 x 110 / 4,3" x 4,3"
32