EXD 158 Twin
Single-cable multi-switch with 2 x 8
user bands and external power supply
unit for the LNB supply
Kathrein Power Saving can be
switched on and o using the rotary
switch
NCF 18
Highly e cient, short-circuit-proof
switched-mode power supply unit
Scope of Delivery
EXD 158 Twin
● EXD 158 Twin
● NCF 18
● Instructions for Use
EXD 258 Twin
● EXD 258 Twin
● Instructions for Use
Transport and Storage
► Transport and store the device in its original packaging.
► Make sure there is no water condensation build-up.
Simplifi ed EU Declaration of Conformity
Hereby, KATHREIN Digital Systems GmbH declares that the radio equipment type
EXD 158 TWIN, order no.: 20510142/EXD 258 TWIN, order no.: 20510143
is in compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
EXD 258 Twin
Loop-through multi-switch to extend
the system by adding two single-cable
connections with 8 user bands each
Kathrein Power Saving:
As soon as there are no longer any
receivers active, a signal is generated
at the last multi-switch via the vertical
low trunk. This signal then switches
the LNB power supply o .
Optional power supply of the multi
switch using the NCF 18 (LNB is not
supplied!)
www.kathrein-ds.com
2 / 8