Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connecting the TWISTERMIX system
Connect the Speakon output of the
PROFILER 14.1000 mixer to the 'IN' Speakon
sockets on the subwoofer connector panel
using the two Speakon cables that come
with the package.
Connecting the TWISTERAMP system
Use the two 4-pole Speakon cables that come with the package to connect Speakon outputs
3 and 4 of the CHAMP 4.250 X power amplifier with the 'IN' Speakon sockets on the subwoofer
connector panels.
Before using the system, read the owner's manual of the CHAMP 4.250 X power amplifier to
become familiar with all functions and features of the unit.
All four slide switches on the back of the CHAMP 4.250 X must be in their middle position.
Both 'X-OVER FREQUENCY' potentiometers on the amplifier must be set to 150 Hz.
Connect the stereo signal source to inputs 1 and 2 of the CHAMP 4.250 X. The active confi-
guration of this system allows to independently control the levels of satellites and subwoofers
to achive a powerful and balanced sound. Use the volume controls of amplifier channels 1
and 2 to set the level of the satellites. Use the volume controls of channel 3 and 4 to set the
level of the subwoofers.
Subwoofer left
22
Downloaded from
www.Manualslib.com
MONITOR
- 6dB
CHAMP 4.250 X
IN
OUT
manuals search engine
Subwoofer left
MONITOR
- 6dB
IN
OUT
Speaker Out
Left
Profiler 14.1000
from Mixer
Subwoofer right
MONITOR
- 6dB
IN
OUT
Right
Subwoofer right
MONITOR
- 6dB
IN
OUT
Werbung
Inhaltsverzeichnis
