EINHELL LE-TP 1750 NIRO Bedienungsanleitung Seite 4

Anleitung LE TP 1750 SPK7
GB
1. Items supplied
1 Fountain pump with BIOCELL filter element
1 Cascade fountain
1 Spout connection
1 Bell fountain
1 Bubble-maker
2. Technical data
Mains connection 230 V ~ 50 Hz
Power input 50 W
Max. pumping rate 1750 l/h
Max. delivery head 2 m
Immersion depth 3 m
Fountain height 1,1 m
3. Pump design
High-performance, universal, submersible motor
pump for continuous duty in garden ponds.
Oil-free motor
Stator hermetically sealed in casting resin
Permanent magnet rotor runs in water
4. BIOCELL intake filter
The intake filter for the fountain pump works with a
BIOCELL filter insert. BIOCELL is a special material
for cleaning water by natural, biological means.
Whereas normal mechanical filters are able only to
trap particles of dirt such as plant remnants or dead
insects and the like, biological filtration actually
breaks down the dirt, including muddy materials. This
decomposition is performed by nitrifying bacteria.
BIOCELL, a porous material developed specially for
biological filtration, provides these bacteria with ideal
conditions for propagation. Toxic organic substances
are transformed inside the BIOCELL into natural
plant nutrients - a natural process that will make a
special contribution to your garden pond's biological
equilibrium.
5. Safety instructions
Electric shocks can be fatal. It is vital, therefore,
to observe the following instructions:
4
28.09.2005 14:46 Uhr Seite 4
The pump is to be operated only from a properly
installed socket outlet with earthing contact.
Use of the pump in swimming pools, garden
ponds and fountains as well as within their zone
of protection is permitted only if the electrical
wiring is installed in accordance with VDE 0700
Part 702 and Part 738: Earth-leakage circuit-
breaker (e.l.c.b.) with 30 mA or 10 mA leakage
current. Please ask your electrician.
Caution! Never use the pump when there are
people in the pool.
Pumps with a 3 m power cable are to be used
only inside buildings. Pumps with a 10 m power
cable (H05RN-F minimum) are compulsory for
outdoor use.
Pull out the power plug before starting any
maintenance work.
If the pump cable or plug is ever damaged, the
cable is not to be repaired! In this case you must
stop using the pump.
Take special care not to allow aggressive liquids
or abrasive substances to run through the pump.
Never suspend the pump from the pressure line
or electric cable.
Protect the pump from freezing temperatures.
Take suitable measures to keep the pump away
from children.
It is prohibited to use cable systems, extension
cables, connection cables or adapters without an
earthing contact.