Legend For Scope Of Delivery; Installation Steps - schellenberg 60934 Anleitung

TECHNICAL DATA RELAY MODULE
Input voltage
Dimensions (L x W x H)

LEGEND FOR SCOPE OF DELIVERY

A 1x Relay module
B 1x Power supply
C 1x Y cable
D 2x LED strip
E 2x Magnetic tape (2 metre)
2x Magnetic tape (1 metre)
F 3x Velcro strap
G 7x Cable ties

INSTALLATION STEPS

1� Remove the contents from their packaging and
lay them out before the installation�
2� Remove the cable cover from the LED strip and adhere the
magnetic tape one piece at a time� (B, step 1)
3� Mount the 2 m LED strip to the long side of the right or left frame and the 1 m
LED strip to the rear cross member of the frame or to the ceiling� (B, step 2)
4� Repeat the process on the other side� (B, step 2)
5� Then fasten the LED strip to the frame using the cable ties� (B, step 3)
6� Connect the LED strip to the Y cable by slotting together the plug-in
connections� (B, step 4)
7� Then connect the power supply to the relay module and the Y cable by
slotting together the plug-in connection� (B, step 5)
8� Then fasten the relay module and the power supply using cable ties and/or a
velcro strap on the drive rail/cross member� Do not fasten to moving objects
on the garage door�
9� Then hook up the relay module to the garage door drive� (B, step 6)
10� Then connect the power plug of the relay module to the socket� (B, step 7)
220-240 V AC
110 x 55 x 30 mm
147
16 16
149 –
152