osann Boogy Handbuch Seite 16

EN
ADJUSTING THE COVER
•
Pull the cover forwards or push the cover backwards to adjust it.
•
The cover can be extended using the zip on the upper side.
Travel system with adapter and baby seat*
•
First, remove the guard bar.
•
Now secure the adapters to the frame of the buggy and check whether this is locked in place correctly for
safety purposes. Depending on the construction of your baby seat, the adapter must be mounted below
or above the guard bar mount.
•
Now mount your baby seat on the adapters and check whether these are locked in place correctly too for
safety purposes. Depending on the model of baby seat, a separate locking mechanism must be activated.
Where applicable, check this in the user manual for your baby seat. For other models, you can hear a "click"
even when you lock the baby seat in place on the adapters.
•
To remove the adapters from the frame, please push the adapters away from the inside to the outside and
not at the locking device.
* Baby seat not included
- 16 -