ASROCK X79 Extreme7 Installationsanleitung Seite 20

Downloaded from www.Manualslib.com
TM TM
2.5 SLI , 3-Way SLI
This motherboard supports NVIDIA
Link Interface) technology that allows you to install up to three identical PCI Express
x16 graphics cards. Currently, NVIDIA
TM
XP 64-bit / Vista / Vista
TM
SLI technology support Windows
Please follow the installation procedures in this section.
Requirements
TM
1. For SLI
cards that are NVIDIA
have three identical 3-Way SLI
certifi ed. For Quad SLI
TM
SLI -ready graphics cards that are NVIDIA
2. Make sure that your graphics card driver supports NVIDIA
(driver version 280.41 and later). Download the driver from NVIDIA website
(www.nvidia.com).
3. Make sure that your power supply unit (PSU) can provide at least the
minimum power required by your system. It is recommended to use
®
NVIDIA
2.5.1 Graphics Card Setup
2.5.1.1 Installing Two SLI
Step 1. Install the identical SLI
because different types of graphics cards will not work together properly.
(Even the GPU chips version shall be the same.) Insert one graphics card
into PCIE1 slot and the other graphics card to PCIE3 slot. Make sure that
the cards are properly seated on the slots.
Step2. If required, connect the auxiliary power source to the PCI Express graph-
ics cards.
20
ASRock X79 Extreme7 Motherboard
manuals search engine
TM
and Quad SLI Operation Guide
® TM TM
SLI , 3-Way SLI and Quad SLI
® TM
SLI technology supports Windows
TM ®
64-bit / 7 / 7 64-bit OS. NVIDIA
® TM TM
Vista / Vista 64-bit / 7 / 7 64-bit OS only.
technology, you should have two identical SLI
® TM
certifi ed. For 3-Way SLI
TM
-ready graphics cards that are NVIDIA
TM
technology, you should have two identical Quad
®
certifi ed.
®
certifi ed PSU. Please refer to NVIDIA website for details.
TM
-Ready Graphics Cards
TM
-ready graphics cards that are NVIDIA
TM
(Scalable
®
XP /
TM
3-Way SLI and Quad
TM
-ready graphics
technology, you should
®
® TM
SLI technology
®
certifi ed