ASROCK Fatal1ty X79 Professional Series Installationsanleitung Seite 42

SLI/XFIRE Power Connector
(4-pin SLI/XFIRE_PWR1)
(see p.4 No. 31)
IEEE 1394 Header
(9-pin FRONT_1394)
(see p.4 No. 34)
Serial port Header
(9-pin COM1)
(see p.4 No. 32)
HDMI_SPDIF Header
(2-pin HDMI_SPDIF1)
(see p.4 No. 33)
42
Downloaded from www.Manualslib.com
Though this motherboard provides 8-pin ATX 12V power connector, it can still work
if you adopt a traditional 4-pin ATX 12V power supply. To use the 4-pin ATX power
supply, please plug your power supply along with Pin 1 and Pin 5.
SLI/XFIRE_POWER1
Fatal1ty X79 Professional Series Motherboard
manuals search engine
4-Pin ATX 12V Power Supply Installation
It is not necessary to use this
connector, but please connect it
with a hard disk power
connecor when two graphics
cards are plugged to this
motherboard.
Besides one default IEEE 1394
port on the I/O panel, there
is one IEEE 1394 header
(FRONT_1394) on this
motherboard. This IEEE 1394
header can support one IEEE
1394 port.
This COM1 header supports a
serial port module.
HDMI_SPDIF header, providing
SPDIF audio output to HDMI
VGA card, allows the system to
connect HDMI Digital TV/
projector/LCD devices. Please
connect the HDMI_SPDIF
connector of HDMI VGA card to
this header.
8 5
4 1