Herunterladen Inhalt Inhalt Diese Seite drucken
ASROCK Fatal1ty X299 Professional Gaming i9-Serie Bedienungsanleitung
ASROCK Fatal1ty X299 Professional Gaming i9-Serie Bedienungsanleitung

ASROCK Fatal1ty X299 Professional Gaming i9-Serie Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Fatal1ty X299 Professional Gaming i9-Serie:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 43
Version 1.0
Published July 2017
Copyright©2017 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners' benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or fitness for a particular
purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate"
ASRock Website: http://www.asrock.com

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für ASROCK Fatal1ty X299 Professional Gaming i9-Serie

  • Seite 1 (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
  • Seite 2 If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply)
  • Seite 3 Fatal1ty Story Who knew that at age 19, I would be a World Champion PC gamer. When I was 13, I actually played competitive billiards in professional tournaments and won four or five games off guys who played at the highest level. I actually thought of making a career of it, but at that young age situations change rapidly.
  • Seite 4 LIVIN’ LARGE Since my first big tournament wins, I have been a “Professional Cyberathlete”, traveling the world and livin’ large with lots of International media coverage on outlets such as MTV, ESPN and a 60 Minutes segment on CBS to name only a few. It's unreal - it's crazy. I’m living a dream by playing video games for a living.
  • Seite 5: Motherboard-Layout

    Fatal1ty X299 Professional Gaming i9 Series Motherboard Layout ATX12V1 CPU_FAN1 CPU_OPT/W_PUMP CLRC BTN1 M2_WIFI_1 RGB_LED2 BIOS _FB1 USB 3.0 Top: T: USB1 RJ-45 2066 Socket B: USB2 USB 3.0 Top: T: USB3 RJ-45 B: USB4 USB 3.1 Top: T: USB31_TA_1 RJ-45 B: USB31_TC_1 CHA_FAN2...
  • Seite 6 No. Description 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1) 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2) ATX 12V Power Connector (ATX12V1) CPU Fan / Waterpump Fan Connector (CPU_OPT/W_PUMP) 2 x 288-pin DDR4 DIMM Slots (DDR4_C2, DDR4_D2) 2 x 288-pin DDR4 DIMM Slots (DDR4_C1, DDR4_D1) CPU Fan Connector (CPU_FAN1) RGB LED Header (RGB_LED2) ATX Power Connector (ATXPWR1)
  • Seite 7 Fatal1ty X299 Professional Gaming i9 Series I/O Panel No. Description No. Description Fatal1ty Mouse Port (USB1) Optical SPDIF Out Port USB 2.0 Port (USB2) USB 3.1 Type-A Port (USB31_TA_1) LAN RJ-45 Port (Intel® I211AT)* USB 3.1 Type-C Port (USB31_TC_1) 10 GLAN RJ-45 Port (AQUANTIA® USB 3.0 Ports (USB3_34) AQC107)** LAN RJ-45 Port (Intel®...
  • Seite 8 ** There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications. ACT/LINK LED SPEED LED LAN Port Activity / Link LED Speed LED Status Description Status Description No Link Orange 100Mbps/1Gbps/2.5Gbps Blinking Data Activity...
  • Seite 9: Chapter 1 Introduction

    If you require technical support related to this mother- board, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.
  • Seite 10: Specifications

    933(OC)/2800(OC)/2666/2400/2133 non-ECC, un-buffered memory * The maximum memory frequency supported may vary by processor type. * Please refer to Memory Support List on ASRock’s website for more information. (http://www.asrock.com/) • Supports non-ECC RDIMM (Registered DIMM) • Max. capacity of system memory: 128GB • Supports Intel®...
  • Seite 11 • 7.1 CH HD Audio with Content Protection (Realtek ALC1220 Audio Codec) • Premium Blu-ray Audio support • Supports Surge Protection (ASRock Full Spike Protection) • Nichicon Fine Gold Series Audio Caps • 120dB SNR DAC with Differential Amplifier • TI® NE5532 Premium Headset Amplifier for Front Panel Audio Connector (Supports up to 600 Ohm headsets) • Pure Power-In...
  • Seite 12 * Ultra USB Power is supported on USB3_12 ports. * ACPI wake-up function is not supported on USB3_12 ports. • 4 x USB 3.0 Ports (Supports ESD Protection (ASRock Full Spike Protection)) • 3 x RJ-45 LAN Ports with LED (ACT/LINK LED and SPEED LED) • 1 x BIOS Flashback Switch...
  • Seite 13 M.2 PCI Express module up to Gen3 x4 (32 Gb/s)** ** Supports Intel® Optane Technology (on M2_2 and M2_3) ** Supports NVMe SSD as boot disks ** Supports ASRock U.2 Kit Connector • 1 x Virtual RAID On CPU Header • 1 x TPM Header • 1 x Power LED and Speaker Header...
  • Seite 14 • 2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports ESD Protection (ASRock Full Spike Protection)) • 2 x USB 3.0 Headers (Support 4 USB 3.0 ports) (ASMedia ASM1074 Hub) (Supports ESD Protection (ASRock Full Spike Protection)) • 1 x Front Panel Type C USB 3.1 Header (ASMedia ASM3142) * Supports USB PD 2.0 up to 12V@3A (36W) charging...
  • Seite 15 Fatal1ty X299 Professional Gaming i9 Series * For detailed product information, please visit our website: http://www.asrock.com Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools.
  • Seite 16 1.3 WiFi-802.11ac Module and ASRock WiFi 2.4/5 GHz Antenna WiFi-802.11ac + BT Module This motherboard comes with an exclusive WiFi 802.11 a/b/g/n/ac + BT v4.0 module (pre-installed on the rear I/O panel) that offers support for WiFi 802.11 a/b/ g/n/ac connectivity standards and Bluetooth v4.0. WiFi + BT module is an easy-to- use wireless local area network (WLAN) adapter to support WiFi + BT.
  • Seite 17 Fatal1ty X299 Professional Gaming i9 Series WiFi Antennas Installation Guide Step 1 Prepare the WiFi 2.4/5 GHz Antennas that come with the package. Step 2 Connect the two WiFi 2.4/5 GHz Antennas to the antenna connectors. Turn the antenna clock- wise until it is securely connected.
  • Seite 18: Chapter 2 Installation

    Chapter 2 Installation This is an ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings.
  • Seite 19: Installing The Cpu

    Fatal1ty X299 Professional Gaming i9 Series 2.1 Installing the CPU 1. Before you insert the 2066-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found.
  • Seite 21 Fatal1ty X299 Professional Gaming i9 Series Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service.
  • Seite 22 2.2 Installing the CPU Fan and Heatsink...
  • Seite 23 Fatal1ty X299 Professional Gaming i9 Series 2.3 Installation of Memory Modules (DIMM) This motherboard provides eight 288-pin DDR4 (Double Data Rate 4) DIMM slots, and supports Quad Channel Memory Technology. 1. For quad channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR4 DIMM pairs.
  • Seite 24 • For CPU with 16 PCIe lanes, please install the memory modules on DDR4_C1, C2, D1 and D2 only.
  • Seite 25 Fatal1ty X299 Professional Gaming i9 Series 2.4 Expansion Slots (PCI Express Slots) There are 5 PCI Express slots on the motherboard. Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.
  • Seite 26 PCIe Slot Configurations (For CPU with 28 PCIe lanes) PCIE1 PCIE2 PCIE3 PCIE4 PCIE5 M2_1 Single Graphics Card Two Graphics Cards in CrossFireX or SLI Mode Three Graphics Cards in 3-Way CrossFireX Mode or 3-Way SLI Mode PCIe Slot Configurations (For CPU with 16 PCIe lanes) PCIE1 PCIE2 PCIE3...
  • Seite 27 Fatal1ty X299 Professional Gaming i9 Series 2.5 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is “Open”.
  • Seite 28 2.6 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard. System Panel Header Connect the power PLED+ PLED-...
  • Seite 29 Fatal1ty X299 Professional Gaming i9 Series Power LED and Speaker Please connect the SPEAKER DUMMY Header chassis power LED and DUMMY (7-pin SPK_PLED1) the chassis speaker to this (see p.1, No. 19) header. PLED+ PLED+ PLED- Serial ATA3 Connectors These ten SATA3 (SATA3_0_1: connectors support SATA see p.1, No.
  • Seite 30 (19-pin USB3_7_8) Vbus Vbus Vbus IntA_PB_SSRX- (see p.1, No. 11) IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy Front Panel Type C USB There is one Front Panel 3.1 Header Type C USB 3.1 Header (26-pin USB31_TC_2) on this motherboard.
  • Seite 31 Fatal1ty X299 Professional Gaming i9 Series Chassis Fan Connectors Please connect fan cables (4-pin CHA_FAN1) to the fan connectors and (see p.1, No. 20) match the black wire to FAN_SPEED_CONTROL CHA_FAN_SPEED (4-pin CHA_FAN2) the ground pin. FAN_VOLTAGE (see p.1, No. 32) Chassis Optional/Water This motherboard Pump Fan Connector...
  • Seite 32 ATX 12V Power This motherboard Connector provides an 8-pin ATX (8-pin ATX12V1) 12V power connector. To (see p.1, No. 3) use a 4-pin ATX power supply, please plug it along Pin 1 and Pin 5. TPM Header This connector supports Trusted (17-pin TPMS1) Platform Module (TPM) system, (see p.1, No.
  • Seite 33 Fatal1ty X299 Professional Gaming i9 Series Virtual RAID On CPU This connector supports Intel® Header Virtual RAID on CPU and +3VSB (4-pin VROC1) NVME/AHCI RAID on CPU (see p.1, No. 10) PCIE. VROC RAID KEY With the introduction of the Intel VROC product, there are three modes of operation: HW key required Key features • Pass-thru only (no RAID)
  • Seite 34: Smart Switches

    To use USB BIOS Flashback function, press the BIOS Flashback Switch for three seconds. Please follow the steps below. 1. Download the latest BIOS file from ASRock's website : http://www.asrock.com. 2. Copy the BIOS file to your USB flash drive.Please make sure the file system of your USB flash drive must be FAT32.
  • Seite 35 Fatal1ty X299 Professional Gaming i9 Series 2.8 Dr. Debug Dr. Debug is used to provide code information, which makes troubleshooting even easier. Please see the diagrams below for reading the Dr. Debug codes. Code Description Please check if the CPU is installed correctly and then clear CMOS.
  • Seite 36 Problem related to USB devices. Please try removing all USB devices. Problem related to memory. Please re-install the CPU and memory then clear CMOS. If the problem still exists, please install only one memory module or try using other memory modules.
  • Seite 37 Fatal1ty X299 Professional Gaming i9 Series 2.9 M.2_SSD (NGFF) Module Installation Guide The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Ultra M.2 Socket can accommodate either a M.2 SATA3 6.0 Gb/s module or a M.2 PCI Express module up to Gen3 x4 (32 Gb/s).
  • Seite 38 Step 3 Move the standoff based on the module type and length. The standoff is placed at the nut location D by default. Skip Step 3 and 4 and go straight to Step 5 if you are going to use the default nut. Otherwise, release the standoff by hand.
  • Seite 39 Fatal1ty X299 Professional Gaming i9 Series M.2_SSD (NGFF) Module Support List Vendor Interface ADATA SATA3 AXNS330E-32GM-B ADATA SATA3 AXNS381E-128GM-B ADATA SATA3 AXNS381E-256GM-B ADATA SATA3 ASU800NS38-256GT-C ADATA SATA3 ASU800NS38-512GT-C ADATA PCIe3 x4 ASX8000NP-256GM-C ADATA PCIe3 x4 ASX8000NP-512GM-C Crucial SATA3 CT120M500SSD4 Crucial SATA3 CT240M500SSD4 Intel...
  • Seite 40 SATA3 WDS100T1B0B-00AS40 SATA3 WDS240G1G0B-00RC30 PCIe3 x4 WDS256G1X0C-00ENX0 (NVME) PCIe3 x4 WDS512G1X0C-00ENX0 (NVME) For the latest updates of M.2_SSD (NFGG) module support list, please visit our website for details: http://www.asrock.com...
  • Seite 41 Fatal1ty X299 Professional Gaming i9 Series 2.10 ASRock RGB LED ASRock RGB LED is a lighting control utility specifically designed for unique individuals with sophisticated tastes to build their own stylish colorful lighting system. Simply by connecting the LED strip, you can customize various lighting schemes and patterns, including Static, Breathing, Strobe, Cycling, Music, Wave and more.
  • Seite 42 ASRock RGB LED Utility Now you can adjust the RGB LED color through the ASRock RGB LED utility. Download this utility from the ASRock Live Update & APP Shop and start coloring your PC style your way! Drag the tab to customize your preference.
  • Seite 43 Fatal1ty X299 Professional Gaming i9 Series 1 Einleitung Vielen Dank, dass Sie sich für die ASRock Fatal1ty X299 Professional Gaming i9 Series entschieden haben – ein zuverlässiges Motherboard, das konsequent unter der strengen Qualitätskontrolle von ASRock hergestellt wurde. Es liefert ausgezeichnete Leistung mit robustem Design, das ASRock Streben nach Qualität und Beständigkeit...
  • Seite 44: Technische Daten

    • Digi Power design • 13-Leistungsphasendesign • Unterstützt Intel® Turbo Boost Max Technology 3.0 * Bitte beachten Sie, dass die 4-Kern-Prozessoren nur Intel® Turbo Boost Technology 2.0 unterstützen. • Unterstützt ASRock Hyper-BCLK-Engine III • Intel® X299 Chipsatz Speicher • Vierkanal-DDR4-Speichertechnologie • 8 x DDR4-DIMM-Steckplätze...
  • Seite 45 Audio • 7.1-Kanal-HD-Audio mit Inhaltsschutz (Realtek ALC1220- Audiocodec) • Erstklassige Blu-ray-Audiounterstützung • Unterstützt Überspannungsschutz (ASRock Full Spike Protection) • Nichicon-Audiokappen der Fine Gold-Serie • 120-dB-SRV-DAC mit Differentialverstärker • TI® NE5532 – erstklassiger Headset-Verstärker für Audioanschluss an der Frontblende (unterstützt Headsets mit bis zu 600 Ohm) • Reiner Stromeingang...
  • Seite 46 Entladung) * 1 x Fatal1ty-Mausanschluss (USB 2.0) ist inklusive • 1 x USB 3.1-Typ-A-Port (10 Gb/s) (ASMedia ASM3142) (unterstützt Schutz gegen elektrostatische Entladung (ASRock Full Spike Protection)) • 1 x USB 3.1-Typ-C-Port (10 Gb/s) (ASMedia ASM3142) (unterstützt Schutz gegen elektrostatische Entladung (ASRock Full Spike Protection)) * Ultra-USB-Stromversorgung wird an den Ports USB3_12 unterstützt.
  • Seite 47 2230/2242/2260/2280-M.2-SATA-III-6,0-Gb/s-Modul und M.2- PCI-Express-Modul bis Gen. 3 x 4 (32 Gb/s)** ** Unterstützt Intel® Optane -Technologie (M2_2, M2_3) ** Unterstützt NVMe-SSD als Bootplatte ** Unterstützt ASRock U.2-Kit Anschluss • 1 x Virtual RAID an der CPU-Stiftleiste • 1 x TPM-Stiftleiste • 1 x Betrieb-LED- und Lautsprecher-Stiftleiste...
  • Seite 48 • 1 x Audioanschluss an der Frontblende (15μ goldene Audioan- schluss) • 1 x Thunderbolt Erweiterungskartenanschluss (5-polig) • 2 x USB-2.0-Stiftleiste (unterstützen 4 USB-2.0-Ports) (unterstützt Schutz gegen elektrostatische Entladung (ASRock Full Spike Protection)) • 2 x USB 3.0-Stiftleisten (unterstützen 4 USB 3.0-Ports) (ASMedia ASM1074-Hub) (unterstützt Schutz gegen elektrostatische Entladung (ASRock Full Spike Protection)) • 1 x Type-C-USB-3.1-Stiftleiste für die Frontblende (ASMedia...
  • Seite 49 • FCC, CE • ErP/EuP ready (ErP/EuP ready-Netzteil erforderlich) * Detaillierte Produktinformationen finden Sie auf unserer Webseite: http://www.asrock.com Bitte beachten Sie, dass mit einer Übertaktung, zu der die Anpassung von BIOS-Einstellungen, die Anwendung der Untied Overclocking Technology oder die Nutzung von Übertaktung- swerkzeugen von Drittanbietern zählen, bestimmte Risiken verbunden sind.
  • Seite 50: Jumpereinstellung

    1.3 Jumpereinstellung Die Abbildung zeigt, wie die Jumper eingestellt werden. Wenn die Jumper-Kappe auf den Kontakten angebracht ist, ist der Jumper „kurzgeschlossen“. Wenn keine Jumper- Kappe auf den Kontakten angebracht ist, ist der Jumper „offen“. Die Abbildung zeigt einen 3-poligen Jumper, dessen Kontakt 1 und Kontakt 2 „kurzgeschlossen“ sind, wenn eine Jumper-Kappe auf diesen 2 Kontakten angebracht ist.
  • Seite 51: Integrierte Stiftleisten Und Anschlüsse

    Fatal1ty X299 Professional Gaming i9 Series 1.4 Integrierte Stiftleisten und Anschlüsse Integrierte Stiftleisten und Anschlüsse sind KEINE Jumper. Bringen Sie KEINE Jumper-Kappen an diesen Stiftleisten und Anschlüssen an. Durch Anbringen von Jumper-Kappen an diesen Stiftleisten und Anschlüssen können Sie das Motherboard dauerhaft beschädigen. Systemblende-Stiftleiste Verbinden Sie Netzschalter, PLED+...
  • Seite 52 Betrieb-LED- und Bitte verbinden Sie die Be- SPEAKER DUMMY Lautsprecher-Stiftleiste trieb-LED des Gehäuses und den DUMMY (7-polig, SPK_PLED1) Gehäuselautsprecher mit dieser (siehe S. 1, Nr. 19) Stiftleiste. PLED+ PLED+ PLED- Serial-ATA-III-Anschlüsse Diese zehn SATA-III-Anschlüsse (SATA3_0_1: unterstützen SATA-Datenkabel siehe S. 1, Nr. 14) für interne Speichergeräte mit (SATA3_2_3: einer Datenübertragungsgeschwi...
  • Seite 53 Fatal1ty X299 Professional Gaming i9 Series (19-polig, USB3_7_8) Vbus Vbus Vbus IntA_PB_SSRX- (siehe S. 1, Nr. 11) IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy Type-C-USB-3.1- Es gibt eine Type-C- Stiftleiste für die USB-3.1-Stiftleiste für die Frontblende Frontblende an diesem (26-polig, USB31_TC_2)
  • Seite 54 Gehäuselüfteranschlüsse Bitte verbinden Sie die (4-polig, CHA_FAN1) Lüfterkabel mit den (siehe S. 1, Nr. 20) Lüfteranschlüssen; der FAN_SPEED_CONTROL CHA_FAN_SPEED (4-polig, CHA_FAN2) schwarze Draht gehört zum FAN_VOLTAGE (siehe S. 1, Nr. 32) Erdungskontakt. Optionales-Gehäuse-/ Dieses Motherboard bietet zwei Wasserpumpen- 4-polige Anschlüsse für Lüfteranschluss Gehäusekühler.
  • Seite 55 Fatal1ty X299 Professional Gaming i9 Series ATX-12-V-Netzanschluss Dieses Motherboard bietet einen (8-polig, ATX12V1) 8-poligen ATX-12-V-Netzan- (siehe S. 1, Nr. 3) schluss. Bitte schließen Sie es zur Nutzung eines 4-poligen ATX-Netzteils entlang Kontakt 1 und Kontakt 5 an. TPM-Stiftleiste Dieser Anschluss unterstützt das (17-polig, TPMS1) Trusted Platform Module- (TPM) (siehe S.1, Nr.
  • Seite 56 Virtual RAID an der Dieser Anschluss unterstützt CPU-Stiftleiste Intel® Virtual RAID an CPU und +3VSB (4-polig VROC1) NVME/AHCI RAID an CPU (siehe S. 1, Nr. 10) PCIE. VROC RAID KEY...
  • Seite 57: Intelligente Schalter

    Fatal1ty X299 Professional Gaming i9 Series 1.5 Intelligente Schalter Das Motherboard hat vier intelligente Schalter: Ein-/Ausschalter, Reset-Schalter, CMOS-leeren-Schalter und ein BIOS-Flashback-Schalter ermöglichen schnelles Ein-/ Ausschalten des Systems, Rücksetzung des Systems, Löschung der CMOS-Werte und Leerung des BIOS. Ein-/Ausschalter Mit dem Ein-/Ausschalter (PWRBTN) kann der Benutzer das System Power...
  • Seite 58: Contenu De L'emballage

    Si vous avez besoin d’une assistance technique pour votre carte mère, veuillez visiter notre site Internet pour plus de détails sur le modèle que vous utilisez. La liste la plus récente des cartes VGA et des processeurs pris en charge est également disponible sur le site Internet de ASRock. Site Internet ASRock http://www.asrock.com.
  • Seite 59: Spécifications

    • Prend en charge la technologie Intel® Turbo Boost Max 3.0 * Veuillez noter que les processeurs à 4 cœurs ne prennent en charge que la technologie Intel® Turbo Boost 2.0. • Prend en charge le moteur Hyper BCLK III ASRock Chipset • Intel® X299 Mémoire...
  • Seite 60 AQC107): • Prend en charge la fonction Wake-On-LAN • Protection contre les orages/décharges électrostatiques (Protection complète contre les pics ASRock) • Prend en charge PXE 2 x Gigabit LAN 10/100/1000 Mb/s (1 x Intel® I219V, 1 x Intel® I211AT) : • Prend en charge la fonction Wake-On-LAN...
  • Seite 61 USB3_12. • 4 x ports USB 3.0 (Protection contre les décharges électrostatiques (Protection complète contre les pics ASRock)) • 3 x port RJ-45 LAN avec LED (LED ACT/LIEN et LED VITESSE) • 1 x bouton BIOS Flashback • 1 x bouton Clear CMOS...
  • Seite 62 M et M.2 PCI Express jusqu'à Gen3 x4 (32 Go/s)** ** Prend en charge la technologie Intel® Optane (M2_2, M2_3) ** Prend en charge les SSD NVMe comme disques de démarrage ** Prend en charge le kit ASRock U.2 Connecteur • 1 x Virtual RAID sur embase de processeur • 1 x embase TPM...
  • Seite 63 • 2 x embases USB 3.0 (4 ports USB 3.0 pris en charge) (concentrateur ASMedia ASM1074) (Protection contre les décharges électrostatiques (Protection complète contre les pics ASRock)) • 1 x embase USB 3.1 Type C sur panneau avant (ASMedia ASM3142) * Gère le chargement USB PD 2.0 jusqu’à...
  • Seite 64 • FCC, CE • ErP/EuP Ready (alimentation ErP/EuP ready requise) * pour des informations détaillées de nos produits, veuillez visiter notre site : http://www.asrock.com Il est important de signaler que l’ o vercloking présente certains risques, incluant des modifi- cations du BIOS, l’ a pplication d’une technologie d’ o verclocking déliée et l’utilisation d’ o utils d’...
  • Seite 65 Fatal1ty X299 Professional Gaming i9 Series 1.3 Configuration des cavaliers (jumpers) L’illustration ci-dessous vous renseigne sur la configuration des cavaliers (jumpers). Lorsque le capuchon du cavalier est installé sur les broches, le cavalier est « court-circuité ». Si le capuchon du cavalier n’ e st pas installé sur les broches, le cavalier est « ouvert ». L’illustration représente un cavalier à...
  • Seite 66 1.4 Embases et connecteurs de la carte mère Les embases et connecteurs situés sur la carte NE SONT PAS des cavaliers. Ne placez JAMAIS de capuchons de cavaliers sur ces embases ou connecteurs. Placer un capuchon de cavalier sur ces embases ou connecteurs endommagera irrémédiablement votre carte mère. Embase du panneau Branchez le bouton de mise PLED+...
  • Seite 67 Fatal1ty X299 Professional Gaming i9 Series Prise DEL d’alimentation Veuillez brancher la DEL SPEAKER DUMMY et haut-parleur d'alimentation du châssis DUMMY (SPK_PLED1 à 7 broches) et le haut-parleur du (voir p.1, No. 19) châssis sur ce connecteur. PLED+ PLED+ PLED- Connecteurs Serial ATA3 Ces dix connecteurs SATA3 sont (SATA3_0_1:...
  • Seite 68 (USB3_7_8 à 19 broches) Vbus Vbus Vbus IntA_PB_SSRX- (voir p.1, No. 11) IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy Embase USB 3.1 Type C Cette carte mère comprend sur panneau avant une embase USB 3.1 (USB31_TC_2 à...
  • Seite 69 Fatal1ty X299 Professional Gaming i9 Series Connecteurs du ventila- Veuillez brancher les câbles teur du châssis du ventilateur sur les (CHA_FAN1 à 4 broches) connecteurs du ventilateur, FAN_SPEED_CONTROL (voir p.1, No. 20) puis reliez le fil noir à la CHA_FAN_SPEED FAN_VOLTAGE (CHA_FAN2 à...
  • Seite 70 Connecteur d’alimentation Cette carte mère est dotée d’un ATX 12V connecteur d’alimentation ATX (ATX12V1 à 8 broches) 12V à 8 broches. Pour utiliser une (voir p.1, No. 3) alimentation ATX à 4 broches, veuillez effectuer les branchements sur la Broche 1 et la Broche 5. Embase TPM Ce connecteur prend en charge un (TPMS1 à...
  • Seite 71 Fatal1ty X299 Professional Gaming i9 Series Virtual RAID sur embase Ce connecteur prend en charge de processeur Intel® Virtual RAID sur processeur +3VSB (VROC1 à 4 broches) et NVME/AHCI RAID sur (voir p.1, No. 10) processeur PCIE. VROC RAID KEY...
  • Seite 72 1.5 Boutons intelligents La carte mère est équipée de quatre boutons intelligents : Bouton Mise en marche, bouton Réinitialisation, bouton Effacer CMOS et bouton BIOS Flashback, permettant aux utilisateurs d’allumer/éteindre rapidement le système, de réinitialiser le système, d’ e ffacer les valeurs CMOS ou de flasher le BIOS. Bouton de mise en marche Le bouton de mise en marche (PWRBTN)
  • Seite 73: Contenuto Della Confezione

    Web di ASRock senza ulteriore preavviso. Per il supporto tecnico correlato a questa scheda madre, visitare il nostro sito Web per informazioni specifiche relative al modello attualmente in uso.
  • Seite 74 • Potenza a 13 fasi • Supporta la tecnologia Intel® Turbo Boost Max 3.0 * I processori 4-Core supportano solo la tecnologia Intel® Turbo Boost 2.0. • Supporto di ASRock Hyper BCLK Engine III Chipset • Intel® X299 • Tecnologia memoria DDR4 Quad Channel Memoria • 8 x alloggi DIMM DDR4...
  • Seite 75 • Supporta Creative SoundBlaster Cinema3 1 x 10 LAN Gigabit 100/1000/2500/5000/10000 Mb/s (AQUANTIA® AQC107): • Supporto WOL (Wake-On-LAN) • Supporto protezione da fulmini/scariche elettrostatiche (ASRock Full Spike Protection) • Supporto PXE 2 x LAN Gigabit 10/100/1000 Mb/s (1 x Intel® I219V, 1 x Intel®...
  • Seite 76 * La funzione di attivazione ACPI non è supportata sulle porte USB3_12. • 4 x porte USB 3.0 (supporto protezione da scariche elettrostatiche (ESD) (protezione completa ASRock dai picchi di corrente)) • 3 x Porta RJ-45 LAN con LED (LED ACT/LINK e LED SPEED) • 1 x interruttore BIOS Flashback...
  • Seite 77 M.2 PCI Express fino a Gen3 x4 (32 Gb/s)** ** Supporta la tecnologia Intel® Optane (M2_2, M2_3) ** Supporto di SSD NVMe come disco d’avvio ** Supporta kit ASRock U.2 Connettore • 1 x RAID virtuale su connettore CPU • 1 x Connettore TPM...
  • Seite 78 • 1 x Connettore Thunderbolt AIC (5-pin) • 2 x Connettori USB 2.0 (supporto di 4 porte USB 2.0) (supporto protezione da scariche elettrostatiche (ASRock Full Spike Protection)) • 2 x Collettori USB 3.0 (supporto di 4 porte USB 3.0) (hub...
  • Seite 79 • FCC, CE • ErP/EuP Ready (è necessaria alimentazione ErP/EuP ready) * Per informazioni dettagliate sul prodotto, visitare il nostro sito Web: http://www.asrock.com Prestare attenzione al potenziale rischio previsto nella pratica di overclocking, inclusa la regolazione delle impostazioni nel BIOS, l'applicazione di tecnologia di Untied Overclocking o l'utilizzo di strumenti di overclocking di terze parti.
  • Seite 80 1.3 Impostazione jumper L'illustrazione mostra in che modo vengono impostati i jumper. Quando il cappuccio del jumper è posizionato sui pin, il jumper è "cortocircuitato". Se sui pin non è posizionato alcun cappuccio del jumper, il jumper è "aperto". L'illustrazione mostra un jumper a 3 pin i cui pin1 e pin2 sono "cortocircuitati"...
  • Seite 81 Fatal1ty X299 Professional Gaming i9 Series 1.4 Header e connettori sulla scheda Gli header e i connettori sulla scheda NON sono jumper. NON posizionare cappucci del jumper su questi header e connettori. Il posizionamento di cappucci del jumper su header e connettori provocherà...
  • Seite 82 Connettore LED Collegare i LED alimentazione e SPEAKER alimentazione e l’altoparlante a questo connettore. DUMMY DUMMY altoparlante (SPK_PLED1 7 pin) (vedere pag. 1, n. 19) PLED+ PLED+ PLED- Connettori Serial ATA3 Questi dieci connettori SATA3 (SATA3_0_1: supportano cavi dati SATA vedere pag.
  • Seite 83 Fatal1ty X299 Professional Gaming i9 Series (USB3_7_8 19 pin) Vbus Vbus Vbus IntA_PB_SSRX- (vedere pag. 1, n. 11) IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy Connettore USB 3.1 tipo C È presente un connettore USB pannello anteriore 3.1 tipo C pannello anteriore (USB31_TC_2 a 26 pin)
  • Seite 84 Connettori ventola telaio Collegare i cavi della (CHA_FAN1 a 4 pin) ventola ai connettori della (vedere pag. 1, n. 20) ventola e far corrispondere FAN_SPEED_CONTROL CHA_FAN_SPEED (CHA_FAN2 a 4 pin) il filo nero al pin di terra. FAN_VOLTAGE (vedere pag. 1, n. 32) Connettore ventola Questa scheda madre fornisce telaio optional / pompa...
  • Seite 85 Fatal1ty X299 Professional Gaming i9 Series Connettore di Questa scheda madre è dotata alimentazione ATX di un connettore di alimen- da 12 V tazione ATX da 12 V a 8 pin. (ATX12V1 a 8 pin) Per utilizzare un'alimentazi- (vedere pag. 1, n. 3) one ATX a 4 pin, collegarla lungo il pin 1 e il pin 5.
  • Seite 86 RAID virtuale su connet- Questo connettore supporta RAID tore CPU virtuale Intel® su CPU e RAID +3VSB (VROC1 a 4 pin) NVME/AHCI su PCIE CPU. (vedere pag. 1, n. 10) VROC RAID KEY...
  • Seite 87 Fatal1ty X299 Professional Gaming i9 Series 1.5 Interruttori intuitivi La scheda madre è dotata di quattro interruttori intuitivi: Interruttore d’alimentazione, interruttore di ripristino, interruttore Clear CMOS ed un interruttore BIOS Flashback che consentono di accendere/spegnere rapidamente il sistema, ripristinare il sistema, cancellare i valori CMOS o aggiornare il BIOS.
  • Seite 88: Contenido Del Paquete

    Si esta documentación sufre alguna modificación, la versión actualizada estará disponible en el sitio web de ASRock sin previo aviso. Si necesita asistencia técnica relacionada con esta placa base, visite nuestro sitio web para obtener información específica sobre el modelo que esté...
  • Seite 89: Especificaciones

    * La frecuencia de memoria máxima admitida puede variar en función del tipo de procesador. * Para obtener más información, consulte la lista de memorias com- patibles en el sitio web de ASRock. (http://www.asrock.com/) • Admite RDIMM no ECC (DIMM registrado) • Capacidad máxima de memoria del sistema: 128GB • Admite Perfil de memoria extremo de Intel®...
  • Seite 90 Audio Codec) • Compatible con audio Blu-ray Premium • Compatible con protección por sobretensión (protección total contra picos de ASRock) • Tapas de audio Nichion de la serie Fine Gold • DAC con SNR de 120 dB con amplificador diferencial • Amplificador de auriculares de alta calidad TI®...
  • Seite 91 * La función de reactivación ACPI no se admite en puertos USB3_12. • 4 x Puertos USB 3.0 (compatible con protección contra electricidad estática (protección ASRock Full Spike)) • 3 x Puerto LAN RJ-45 con LED (ACT/LINK LED y SPEED LED) • 1 x Conmutador de actualización de la BIOS...
  • Seite 92 ** Compatible con la tecnología Optane de Intel® (M2_2, M2_3) ** Admite unidad de estado sólido de NVMe como disco de arranque ** Admite el kit U.2 de ASRock Conector • 1 x RAID virtual en base de conexiones de CPU • 1 x Conector TPM...
  • Seite 93 • 2 x Cabezales USB 3.0 (compatible con 4 puertos USB 3.0) (concentrador ASMedia ASM1074AE) (compatible con protección contra electricidad estática (protección ASRock Full Spike)) • 1 x Base de conexiones USB 3.1 de tipo C en el panel frontal (ASMedia ASM3142) * Compatible con USB PD 2.0, carga de hasta 12 V, 3 A (36 W)
  • Seite 94 • Preparado para ErP/EuP (se necesita una fuente de alimentación preparada para ErP/EuP) * Para obtener información detallada del producto, visite nuestro sitio Web: http://www.asrock.com Tenga en cuenta que hay un cierto riesgo implícito en las operaciones de aumento de la velocidad del reloj, incluido el ajuste del BIOS, aplicando la tecnología de aumento de velocidad...
  • Seite 95 Fatal1ty X299 Professional Gaming i9 Series 1.3 Instalación de los puentes La instalación muestra cómo deben instalarse los puentes. Cuando la tapa de puente se coloca en los pines, el puente queda “Corto”. Si no coloca la tapa de puente en los pines, el puente queda “Abierto”.
  • Seite 96 1.4 Conectores y cabezales incorporados Los cabezales y conectores incorporados NO son puentes. NO coloque tapas de puente sobre estos cabezales y conectores. Si coloca tapas de puente sobre los cabezales y conectores dañará de forma permanente la placa base. Cabezal del panel del Conecte el interruptor de PLED+...
  • Seite 97 Fatal1ty X299 Professional Gaming i9 Series LED de alimentación y Conecte el LED de alimentación SPEAKER base de conexiones para la del chasis y el altavoz del chasis DUMMY DUMMY altavoz a esta base de conexiones. (SPK_PLED1 de 7 pines) (consulte la pág.1, Nº...
  • Seite 98 (USB3_7_8 de 19 pines) Vbus Vbus Vbus IntA_PB_SSRX- (consulte la pág.1, Nº 11) IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy Base de conexiones USB Existe una base de conexiones 3.1 de tipo C en el panel USB 3.1 de tipo C en el panel frontal frontal en esta placa base.
  • Seite 99 Fatal1ty X299 Professional Gaming i9 Series Conectores para el venti- Conecte los cables del lador del chasis ventilador a los conectores (CHA_FAN1 de 4 pines) del ventilador y haga FAN_SPEED_CONTROL CHA_FAN_SPEED (consulte la pág.1, N.º 20) coincidir el cable negro con FAN_VOLTAGE (CHA_FAN2 de 4 pines) el pin de conexión a tierra.
  • Seite 100 Conector de alimentación Esta placa base contiene un ATX de 12V conector de alimentación ATX (ATX12V1 de 8 pines) de 12V y 8 pines. Para utilizar (consulte la pág.1, Nº 3) una toma de alimentación ATX de 4 pines, conéctela en los Pines del 1 al 5.
  • Seite 101 Fatal1ty X299 Professional Gaming i9 Series RAID virtual en base de Este conector admite RAID virtual conexiones de CPU en CPU de Intel® y RAID NVME/ +3VSB (VROC1 de 4 pines) AHCI en CPU PCIE. (consulte la pág.1, Nº 10) VROC RAID KEY...
  • Seite 102 1.5 Interruptores inteligentes La placa base contiene cuatro interruptores inteligentes: Interruptor de alimentación, Interruptor de restablecimiento, Interruptor de borrado de CMOS e Interruptor de selección de BIOS, lo que permite a los usuarios encender y apagar el sistema, restablecer el sistema, borrar los valores de la CMOS o cambiar entre la BIOS A y la BIOS B. Interruptor de El interruptor de alimentación...
  • Seite 103: Комплект Поставки

    ATX) • Краткое руководство по установке системной платы ASRock Fatal1ty X299 Professional Gaming i9 Series • Компакт-диск с ПО к системной плате ASRock Fatal1ty X299 Professional Gaming i9 Series • 1 x экран панели с портами ввода-вывода • карта ASRock SLI_HB_Bridge_2S - 1 шт. (приобретаются отдельно) • 1 x карта...
  • Seite 104: Технические Характеристики

    ECC. * Максимальная поддерживаемая частота памяти зависит от типа процессора. * Дополнительная информация представлена в Списке совместимой памяти (Memory Support List ) на веб-сайте ASRock. (http://www.asrock.com/) • Поддержка RDIMM без ЕСС (Регистровая память DIMM) • Максимальный объем ОЗУ: 128 ГБ • Поддерживается Intel® Extreme Memory Profile (XMP) 2.0 • Гнезда...
  • Seite 105 • 7.1-канальный звук высокой четкости HD Audio с защитой данных (аудиокодек Realtek ALC1220) • Поддержка Premium Blu-ray Audio • Защита от перенапряжения (ASRock Full Spike Protection) • Конденсаторы для аудиосистем серии Nichicon Fine Gold • ЦАП с отношением сигнал/шум 120 дБ с...
  • Seite 106 * 1 x порт для мыши Fatal1ty (USB 2.0) входит в комплект • 1 x Порт USB 3.1 тип А (10 Гб/с) (ASMedia ASM3142) (с защитой от электростатического напряжения (ASRock Full Spike Protection)) • 1 x Порт USB 3.1 тип С (10 Гб/с) (ASMedia ASM3142) (с...
  • Seite 107 с ключом M. ** Поддержка технологии Intel® Optane (M2_2, M2_3) ** Поддерживаются в качестве загрузочных SSD-диски типа NVMe. ** Поддерживается комплект ASRock U.2. Разъемы • 1 x колодка для виртуального RAID-контроллера на ЦП. • 1 x колодка ТРМ • 1 x колодка светодиодного индикатора питания и динамика...
  • Seite 108 аудиоразъемов) • 1 x AIC-разъем Thunderbolt (5-контактный) • 2 x колодки USB 2.0 (4 порта USB 2.0) (с защитой от электростатических разрядов (ASRock Full Spike Protection)) • 2 x Колодки USB 3.0 (с поддержкой до 4 портов USB 3.0) (концентратор ASMedia ASM1074) (с защитой от...
  • Seite 109 • FCC, CE • Совместимость с ErP/EuP (необходим блок питания, соответствующий стандарту ErP/EuP) * С дополнительной информацией об изделии можно ознакомиться на веб-сайте: http://www.asrock.com Следует учитывать, что разгон процессора, включая изменение настроек BIOS, применение технологии Untied Overclocking и использование инструментов разгона...
  • Seite 110 1.3 Установка перемычек Установка перемычек показана на рисунке. При установке колпачковой перемычки на контакты перемычка «замкнута». Если колпачковая перемычка на контакты не установлена, перемычка «разомкнута». На рисунке показана 3-контактная перемычка с замкнутыми контактами 1 и 2 при установке на них колпачковой...
  • Seite 111 Fatal1ty X299 Professional Gaming i9 Series 1.4 Колодки и разъемы, расположенные на материнской плате Расположенные на материнской плате колодки и разъемы перемычками НЕ являются. НЕ устанавливайте на эти колодки и разъемы колпачковые перемычки. Установка колпачковых перемычек на эти колодки и разъемы может вызвать неустранимое повреждение...
  • Seite 112 Колодка светодиодного Предназначена SPEAKER индикатора питания и для подключения DUMMY DUMMY динамика корпуса светодиодного индикатора (7-контактная, питания и динамика SPK_PLED1) корпуса. (см. стр. 1, № 19) PLED+ PLED+ PLED- Разъемы Serial ATA3 Эти десять разъемов (SATA3_0_1: SATA3 предназначены для см. стр. 1, № 14) подключения...
  • Seite 113 Fatal1ty X299 Professional Gaming i9 Series (19-контактная, Vbus Vbus Vbus IntA_PB_SSRX- USB3_7_8) IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ (см. стр. 1, № 11) IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy колодка для порта Type C На системной плате USB 3.1 на фронтальной предусмотрена...
  • Seite 114 Разъемы вентиляторов Предназначены для корпуса подключения кабелей (4-контактный, разъемов вентиляторов FAN_SPEED_CONTROL CHA_FAN1) и подключения черного CHA_FAN_SPEED FAN_VOLTAGE (см. стр. 1,№ 20) провода к заземлению. (4-контактный, CHA_FAN2) (см. стр. 1,№ 32) Разъем для Данная материнская дополнительного плата оснащена двумя вентилятора или помпы 4-контактными...
  • Seite 115 Fatal1ty X299 Professional Gaming i9 Series Разъем питания Эта материнская плата АТХ 12 В снабжена 8-контактным (8-контактный, разъемом питания АТХ ATX12B1) 12 В. Чтобы использовать (см. стр. 1, № 3) 4-контактный разъем питания ATX, подключите его вдоль контакта 1 и контакта 5. Колодка...
  • Seite 116 Колодка для Этот разъем поддерживает виртуального RAID- виртуальный RAID-контроллер +3VSB контроллера на ЦП Intel® на ЦП и RAID-контроллер (4-контактный разъем NVME/AHCI на шине PCIE ЦП. VROC RAID KEY VROC1) (см. стр. 1, № 10)
  • Seite 117 Fatal1ty X299 Professional Gaming i9 Series 1.5 Электронные кнопки На системной плате размещены четыре электронных переключателя: выключателем питания, кнопкой сброса, кнопкой очистки CMOS-памяти и переключателем BIOS Flashback, которые позволяют быстро выключать и выключать систему, сбрасывать систему, сбросить настройки в CMOS-памяти и прошить BIOS. Кнопка...
  • Seite 118: Conteúdo Da Embalagem

    Se precisar de assistência técnica relacionada a esta placa principal, visite o nosso site para obter informações específicas sobre o modelo que estiver utilizando. Você também poderá encontrar a lista de placas VGA e CPU mais recentes suportadas no site da ASRock. Site da ASRock http://www.asrock.com.
  • Seite 119 2800(OC)/2666/2400/2133 não-ECC, memória sem buffer * A frequência máxima de memória suportada pode variar por tipo de processador. * Por favor, consulte a Lista de Suporte de Memória no site da ASRock para obter mais informação. (http://www.asrock.com/) • Suporta RDIMM não-ECC (DIMM Registrada) • Capacidade máxima da memória do sistema: 128GB...
  • Seite 120 1 x 10 Gigabit LAN 100/1000/2500/5000/10000 Mb/s (AQUANTIA® AQC107): • Suporta Wake-On-LAN • Suporta Proteção contra Relâmpago/ESD (Proteção Total Contra Picos ASRock) • Suporta PXE 2 x Gigabit LAN 10/100/1000 Mb/s (1 x Intel® I219V, 1 x Intel® I211AT): • Suporta Wake-On-LAN • Suporta Proteção contra Relâmpago/ESD (Proteção Total Contra...
  • Seite 121 * 1 x Porta de Mouse Fatal1ty (USB 2.0) é incluída • 1 x Porta USB 3.1 Tipo A (10 Gb/s) (ASMedia ASM3142) (Suporta Proteção ESD (Proteção Total Contra Picos ASRock)) • 1 x Porta USB 3.1 Tipo C (10 Gb/s) (ASMedia ASM3142) (Suporta Proteção ESD (Proteção Total Contra Picos ASRock))
  • Seite 122 PCI Express até Gen3 x4 (32 Gb/s)** ** Suporta Tecnologia Intel® Optane (M2_2, M2_3) ** Suporta NVMe SSD como discos de inicialização ** Suporta Kit ASRock U.2 Conector • 1 x RAID Virtual no cabeçote da CPU • 1 x Plataforma TPM • 1 x LED de alimentação e Cabeçote de Autofalante...
  • Seite 123 • 1 x Conector Thunderbolt AIC (5 pinos) • 2 x Plataformas USB 2.0 (Suporta 4 portas USB 2.0) (Suporta Proteção ESD (Proteção Total Contra Picos ASRock)) • 2 x Plataformas USB 3.0 (Suporta 4 portas USB 3.0) (ASMedia ASM1074 núcleo) (Suporta Proteção ESD (Proteção Total Contra Picos ASRock)) • 1 x Painel Frontal USB 3.1 Tipo C (ASMedia ASM3142)
  • Seite 124 • Preparada para ErP/EuP (é necessária uma fonte de alimentação preparada para ErP/EuP) * Para obter informações detalhadas sobre o produto, por favor, visite o nosso site: http://www.asrock.com Por favor, observe que existe um certo risco envolvendo overclocking, incluindo o ajuste das definições na BIOS, a aplicação de tecnologia Untied Overclocking ou a utilização de ferra-...
  • Seite 125 Fatal1ty X299 Professional Gaming i9 Series 1.3 Configuração dos jumpers A imagem abaixo mostra como os jumpers são configurados. Quando a tampa do jumper é colocada nos pinos, o jumper é "Curto". Se não for colocada uma tampa de jumper nos pinos, o jumper é "Aberto". A imagem mostra um jumper de 3 pinos cujos pino1 e pino2 estão "Curtos"...
  • Seite 126 1.4 Suportes e conectores onboard Os conectores e suportes onboard NÃO são jumpers. NÃO coloque tampas de jumpers sobre es- tes terminais e conectores Colocar tampas de jumpers sobre os terminais e conectores irá causar danos permanentes à placa-mãe. Suporte do painel de Ligue o botão de alimentação, PLED+ PLED-...
  • Seite 127 Fatal1ty X299 Professional Gaming i9 Series LED de alimentação e Conecte o LED de alimentação SPEAKER DUMMY Cabeçote de Autofalante do chassi e o autofalante do DUMMY (SPK_PLED1 7 pinos) chassi a este cabeçote. (ver p.1, N.º 19) PLED+ PLED+ PLED- Conectores série ATA3 Estes dez conectores SATA3...
  • Seite 128 (USB3_7_8 19 pinos) Vbus Vbus Vbus IntA_PB_SSRX- (ver p.1, N.º 11) IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy Painel Frontal Cabeçote Há um Painel Frontal USB 3.1 Tipo C Cabeçote USB 3.1 Tipo (USB31_TC_2 de 26 C nesta placa mãe.
  • Seite 129 Fatal1ty X299 Professional Gaming i9 Series Conectores da Ventoinha Por favor, conecte os do Chassi cabos do ventilador aos (CHA_FAN1 de 4 pinos) conectores do ventilador e FAN_SPEED_CONTROL CHA_FAN_SPEED (ver p.1, N.º 20) corresponda o fio preto no FAN_VOLTAGE (CHA_FAN2 de 4 pinos) pino terra.
  • Seite 130 Conector de alimentação Esta placa-mãe inclui um conec- de 12V ATX tor de alimentação de 12V ATX (ATX12V1 de 8 pinos) de 8 pinos. Para utilizar uma fonte (ver p.1, N.º 3) de alimentação ATX de 4 pinos, introduza-a no Pino 1 e Pino 5. Suporte TPM Este conector suporta um sistema (TPMS1 de 17 pinos)
  • Seite 131 Fatal1ty X299 Professional Gaming i9 Series RAID Virtual no Cabeçote Este conector suporta Intel® Virtu- da CPU al RAID na CPU e RAID NVME/ +3VSB (VROC1 4-pinos) AHCI na CPU PCIE. (ver p.1, N.º 10) VROC RAID KEY...
  • Seite 132 1.5 Interruptores inteligentes A placa-mãe tem quatro chaves inteligentes: Chave liga/desliga, Chave de Reset, Chave para Limpar CMOS e uma Chave BIOS Flashback BIOS, que permite aos usuários rapidamente ligar/desligar o sistema, reiniciar o sistema, limpar os valores de CMOS ou inicializar de flash.
  • Seite 133: Ambalaj İçeriği

    Bu belgeler üzerinde herhangi bir değişiklik yapılması durumunda, güncellenmiş sürüm, herhangi bir bildirim yapılmaksızın ASRock'ın web sitesinde yer alacaktır. Bu ana kartla ilgili olarak teknik destek almak isterseniz, lütfen kullandığınız model hakkında özel bilgiler için web sitemizi ziyaret edin. En güncel VGA kartları...
  • Seite 134 2800(OC)/2666/2400/2133 ECC olmayan, arabelleksiz bellek destekler * Desteklenen maksimum bellek frekansı işlemci türüne göre değişiklik gösterebilir. * Ayrıntılı bilgi için ASRock'ın web sitesindeki Bellek Desteği Listesine bakın. (http://www.asrock.com/) • ECC olmayan RDIMM'ı (Kayıtlı DIMM) destekler • En fazla sistem belleği kapasitesi: 128GB • Intel®...
  • Seite 135 • İçerik Koruma özelliğine sahip 7.1 kanal HD Ses (Realtek ALC1220 Ses Kodlayıcı-Kod Çözücü) • Üstün Blu-ray Ses desteği • Dalgalanma Koruması Destekler (ASRock Tam Ani Gerilim Koruması) • Nichicon Fine Gold Serisi Ses Kapakları • Fark Yükselteçli 120 dB SNR DAC • TI®...
  • Seite 136 G/Ç • 1 tane PS/2 Fare/Klavye Bağlantı Noktası • 1 tane Optik SPDIF Çıkışı Bağlantı Noktası • 1 tane USB 2.0 Bağlantı Noktası (ESD Koruması Destekler (ASRock Tam Ani Gerilim Koruması)) * 1 tane Fatal1ty Fare Yuvası (USB 2.0) dahildir • 1 tane USB 3.1 Tip A Bağlantı...
  • Seite 137 Gen3 x4 (32 Gb/sn.) değerine kadar M.2 PCI Express modülünü destekler** ** Intel® Optane Teknolojisini destekler (M2_2, M2_3) ** Önyükleme diskleri olarak NVMe SSD destekler ** ASRock U.2 Takımını destekler • 1 tane CPU Bağlantısında Sanal RAID Bağlayıcı • 1 tane TPM Bağlantısı...
  • Seite 138 • 1 tane Thunderbolt AIC Bağlayıcısı (5 pimli) • 2 tane USB 2.0 Bağlantısı (4 USB 2.0 bağlantı noktası destekler) (ESD Koruması destekler (ASRock Tam Ani Gerilim Koruması)) • 2 tane USB 3.0 Bağlantısı (4 USB 3.0 bağlantı noktası destekler) (ASMedia ASM1074 göbeği) (ESD Koruması...
  • Seite 139 • ErP/EuP için hazır (ErP/EuP için hazır güç beslemesi gereklidir) * Detaylı ürün bilgisi için lütfen web sitemizi ziyaret edin: http://www.asrock.com Lütfen, BIOS ayarlarını düzenleme, Bağımsız Hız Aşırtma Teknolojisinin uygulanması veya üçüncü taraf hız aşırtma araçlarının kullanılması da dâhil olmak üzere tüm hız aşırtma işlem- lerinin belirli bir risk taşıdığını...
  • Seite 140 1.3 Bağlantı Teli Kurulumu Çizim, bağlantı tellerinin kurulumunu göstermektedir. Tel kapağı, pimlerin üzerine yerleştirildiğinde, tel "Kısa" olur. Pimlerin üzerinde tel kapağı bulunmadığında, tel "Açık" olur. Çizim, pin1 ve pin2 alanları "Kısa" olan ve bu iki pim üzerinde bir bağlantı teli kapağı bulunan 3 pimli bağlantı telini göstermektedir. CMOS'u Temizle Bağlantı...
  • Seite 141 Fatal1ty X299 Professional Gaming i9 Series 1.4 Yerleşik Bağlantılar ve Bağlayıcılar Yerleşik bağlantılar ve bağlayıcılar bağlantı teli değildir. Bağlantı teli kapaklarını bu bağlantı ve bağlayıcılar üzerine yerleştirmeyin. Bağlantı teli kapaklarının bağlantılar ve bağlayıcılar üzerine yerleştirilmesi ana karta kalıcı hasar verebilir. Sistem Paneli Bağlantısı...
  • Seite 142 Güç LED’i ve Hoparlör Lütfen kasa güç LED’ini SPEAKER DUMMY Bağlantısı ve kasa hoparlörünü bu DUMMY (7 pimli SPK_PLED1) bağlantıya takın. (bkz. s.1, No. 19) PLED+ PLED+ PLED- Seri ATA3 Bağlayıcıları Bu on SATA3 bağlayıcısı, veri (SATA3_0_1: aktarım hızı 6,0 Gb/sn'ye kadar bkz.
  • Seite 143 Fatal1ty X299 Professional Gaming i9 Series (19 pimli USB3_7_8) Vbus Vbus Vbus IntA_PB_SSRX- (bkz. s.1, No. 11) IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy Ön Panel C Tipi USB 3.1 Bu anakartta bir Ön Panel Bağlantısı...
  • Seite 144 Kasa Fanı Bağlayıcıları Lütfen fan kablolarını (4 pimli CHA_FAN1) fan bağlayıcılarına takın (bkz. s.1, No. 20) ve siyah teli topraklama FAN_SPEED_CONTROL CHA_FAN_SPEED (4 pimli CHA_FAN2) pimine bağlayın. FAN_VOLTAGE (bkz. s.1, No. 32) Kasa İsteğe Bağlı/Su Bu anakart, iki 4 Pinli Pompası...
  • Seite 145 Fatal1ty X299 Professional Gaming i9 Series ATX 12V Güç Bağlayıcısı Bu ana kart, 8 pimli ATX (8 pimli ATX12V1) 12V güç bağlayıcısı sağlar. (bkz. s.1, No. 3) 4 pimli ATX güç beslemesi kullanmak için lütfen Pim 1 ve Pim 5'e bağlayın. TPM Bağlantısı...
  • Seite 146 CPU Bağlantısında Sanal Bu bağlayıcı, CPU'da Intel® Sanal RAID RAID ve CPU PCIE'de NVME/ +3VSB (4 pinli VROC1) AHCI RAID'i destekler. (bkz. s.1, No. 10) VROC RAID KEY...
  • Seite 147 Fatal1ty X299 Professional Gaming i9 Series 1.5 Akıllı Anahtarlar Anakartta dört adet akıllı düğme bulunur: Güç Düğmesi, Sıfırlama Düğmesi, CMOS Temizleme Düğmesi ve bir BIOS Flashback Anahtarı kullanıcıların sistemi hızlı bir şekilde açıp kapatmalarını, sistemi sıfırlamalarını, CMOS değerlerini temizlemelerini ya da BIOS'u yükseltmelerini sağlar. Güç...
  • Seite 148 한 성능과 견고한 설계를 제공합니다 . 마더보드 규격과 BIOS 소프트웨어를 업데이트할 수도 있기 때문에 , 이 문서의 내용은 예고 없이 변경될 수 있습니다 . 이 설명서가 변경될 경우 , 업데이트된 버전은 ASRock 의 웹사이트에서 추가 통지 없이 제공됩니다 . 이 마더보드와 관련하여 기술적 지원이...
  • Seite 149 2666/2400/2133 비 ECC, 비버퍼링 메모리 지원 * 지원되는 메모리 주파수는 프로세서 종류에 따라 다를 수 있습 니다 . * 추가 정보를 원하시면 ASRock 웹사이트에 있는 메모리 지원 목 록을 참조하십시오 . (http://www.asrock.com/) • 비 ECC RDIMM( 등록 DIMM) 지원 • 시스템 메모리 최대 용량 : 128GB • Intel®...
  • Seite 150 10 Gigabit LAN 100/1000/2500/5000/10000 Mb/s 1 개 (AQUANTIA® AQC107): • Wake-On-LAN 지원 • 번개 /ESD 보호 지원 (ASRock 풀 스파이크 보호 ) • PXE 지원 Gigabit LAN 10/100/1000 Mb/s 2 개 (Intel® I219V 1 개 , Intel® I211AT 1 개 ): • Wake-On-LAN 지원...
  • Seite 151 ** 울트라 USB 전원은 USB3_12 포트에서 지원됩니다 . * ACPI 절전 해제 기능은 USB3_12 포트에서 지원되지 않습니다 . • USB 3.0 포트 4 개 (ESD 보호 지원 (ASRock 풀 스파이크 보호 )) • LED 장착 RJ-45 LAN 포트 3 개 (ACT/LINK LED 및 SPEED LED) • BIOS 플래시백...
  • Seite 152 (ASRock 풀 스파이크 보호 )) • USB 3.0 헤더 2 개 (USB 3.0 포트 4 개 지원 ) (ASMedia ASM1074 허브 ) (ESD 보호 지원 (ASRock 풀 스파이크 보호 )) • 전면 패널 타입 C USB 3.1 헤더 1 개 (ASMedia ASM3142) * 최대...
  • Seite 153 인증 • ErP/EuP 사용 가능 (ErP/EuP 사용 가능 전원공급장치 필요 ) * 자세한 제품 정보에 대해서는 당사 웹사이트를 참조하십시오 : http://www.asrock.com BIOS 설정을 조정하거나 Untied Overclocking Technology 를 적용하거나 타업체의 오 버클로킹 도구를 사용하는 것을 포함하는 오버클로킹에는 어느 정도의 위험이 따른...
  • Seite 154 1.3 점퍼 설정 그림은 점퍼를 어떻게 설정하는지 보여줍니다 . 점퍼 캡을 핀에 씌우면 점퍼가 “단락” 됩니다 . 점퍼 캡을 핀에 씌우지 않으면 점퍼가 “단선”됩니다 . 그림 은 3 핀 점퍼를 보여주며 핀 1 과 핀 2 는 점퍼 캡을 씌울 때 “단락”됩니다 . Clear CMOS 점퍼...
  • Seite 155 Fatal1ty X299 Professional Gaming i9 Series 1.4 온보드 헤더 및 커넥터 온보드 헤더와 커넥터는 점퍼가 아닙니다 . 점퍼 캡을 온보드 헤더와 커넥터에 씌우지 마 십시오 . 점퍼 캡을 온보드 헤더와 커넥터에 씌우면 마더보드가 영구적으로 손상됩니다 . 섀시의 전원 스위치 , 리 시스템...
  • Seite 156 전원 LED 및 스피커 헤 섀시 전원 LED 와 섀시 스피커 SPEAKER DUMMY 를 이 헤더에 연결하십시오 . 더 DUMMY (7 핀 SPK_PLED1) (1 페이지 , 19 번 항목 참조 ) PLED+ PLED+ PLED- 시리얼 ATA3 커넥터 이들 열 개의 SATA3 커넥터는 (SATA3_0_1: 최대...
  • Seite 157 Fatal1ty X299 Professional Gaming i9 Series (19 핀 USB3_7_8) Vbus Vbus Vbus IntA_PB_SSRX- (1 페이지 , 11 번 항목 참 IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ 조 ) IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy 전면 패널 타입 C USB 3.1 이...
  • Seite 158 섀시 팬 커넥터 팬 케이블을 팬 커넥터에 (4 핀 CHA_FAN1) 연결하고 검은색 와이어를 (1 페이지 , 20 번 항목 참 접지핀에 연결하십시오 . FAN_SPEED_CONTROL CHA_FAN_SPEED 조 ) FAN_VOLTAGE (4 핀 CHA_FAN2) (1 페이지 , 32 번 항목 참 조 ) CPU/ 섀시...
  • Seite 159 Fatal1ty X299 Professional Gaming i9 Series ATX 12V 전원 커넥터 이 마더보드에는 8 핀 (8 핀 ATX12V1) ATX 12V 전원 커넥터가 (1 페이지 , 3 번 항목 참 탑재되어 있습니다 . 4 핀 조 ) ATX 전원공급장치를 사 용하려면 핀 1 과 핀 5 을 따라...
  • Seite 160 가상 RAID On CPU 헤더 이 커넥터는 Intel® 가상 RAID on (4 핀 VROC1) CPU 와 NVME/AHCI RAID on +3VSB (1 페이지 , 10 번 항목 참 CPU PCIE 를 지원합니다 . 조 ) VROC RAID KEY...
  • Seite 161 Fatal1ty X299 Professional Gaming i9 Series 1.5 스마트 스위치 마더보드에는 스마트 스위치 네 개가 탑재되어 있습니다 : 전원 스위치 , 리셋 스 위치 , CMOS 초기화 스위치 및 BIOS 플래시백 스위치 1 개 . 이 스위치들로 시스 템을 빨리 켜고 끄거나 시스템을 리셋하거나 CMOS 값을 지우거나 BIOS 를 플 래시할...
  • Seite 162 1.1 パッケージの内容 • ASRock Fatal1ty X299 Professional Gaming i9 Series マザーボード (ATX フォームファクタ) • ASRock Fatal1ty X299 Professional Gaming i9 Series クイックインストールガイ ド • ASRock Fatal1ty X299 Professional Gaming i9 Series サポート CD • 1 x I/O パネルシールド • 1 x ASRock SLI_HB_Bridge_2S カード (オプション)...
  • Seite 163 • 13 電源フェーズ設計 • Intel® ターボブースト Max テク ノロジー 3.0 に対応 * 4 コアプロセッサは、 Intel® ターボブーストテク ノロジー 2.0 のみ に対応するこ とに注意してく ださい。 • ASRock ハイパー BCLK エンジン III に対応 チップセッ ト • Intel® X299 • クアッとチャンネル DDR4 メモリテク ノロジー メモリ...
  • Seite 164 1 x 10 ギガビッ ト LAN 100/1000/2500/5000/10000 Mb/s (AQUAN- TIA® AQC107): • Wake-On-LAN (ウェイク オン ラン) に対応 • 雷 / 静電気放電 (ESD) 保護に対応 (ASRock 完全スパイク保護) • PXE をサポート 2 x ギガビッ ト LAN 10/100/1000 Mb/s (1 x Intel® I219V、 1 x Intel®...
  • Seite 165 * Ultra USB Power (ウルトラ USB パワー) には USB3_12 ポート上で 対応します。 *ACPI ウェークアップ機能は USB3_12 ポートには対応していませ ん。 • 4 x USB 3.0 ポート (静電気放電 (ESD) 保護に対応 (ASRock 完全 スパイク保護) ) • LED 付き 3 x RJ-45 LAN ポート (ACT/LINK LED と SPEED LED) • 1 x BIOS フラッシュバックスイッチ...
  • Seite 166 最大 Gen3 x4 (32 Gb/s) までの M.2 PCI Express モジュールに対 応 ** ** Intel® Optane テク ノロジーに対応 (M2_2, M2_3) ** 起動ディスクとして NVMe SSD に対応 ** ASRock U.2 キッ トに対応 • 1 x CPU ヘッダー上の仮想 RAID コネクタ • 1 x TPM ヘッダー...
  • Seite 167 • 2 x USB 2.0 ヘッダー (4 個の USB 2.0 ポートに対応) (静電気放電 (ESD) 保護に対応 (ASRock 完全スパイク保護) ) • 2 x USB 3.0 ヘッダー (4 個の USB 3.0 ポートに対応) ( ASMedia ASM1074 ハブ) ( 静電気放電 (ESD) 保護に対応 (ASRock 完全ス パイク保護) ) • 1 x フロントパネルタイプ C USB 3.1 ヘッダー (ASMedia ASM3142) * 最大...
  • Seite 168 認証 • FCC、 CE • ErP/EuP Ready ( ErP/EuP 対応電源供給装置が必要です) * 商品詳細については、 当社ウェブサイ トをご覧く ださい。 http://www.asrock.com BIOS 設定の調整、 アンタイ ドオーバークロックテク ノロジーの適用、 サードパーティの オーバークロックツールの使用などを含む、 オーバークロックには、 一定のリスクを伴い ますのでご注意く ださい。 オーバークロックするとシステムが不安定になったり、 システム のコンポーネントやデバイスが破損するこ とがあります。 ご自分の責任で行ってく ださい。 弊社では、 オーバークロックによる破損の責任は負いかねますのでご了承く ださい。...
  • Seite 169 Fatal1ty X299 Professional Gaming i9 Series 1.3 ジャンパー設定 このイラストは、 ジャンパーの設定方法を示しています。 ジャンパーキャップがピンに 被さっていると、 ジャンパーは 「ショート」 です。 ジャンパーキャップがピンに被さってい ない場合には、 ジャンパーは 「オープン」 です。 この図は 3 ピンのジャンパーを表し、 ジャ ンパーキャップがピン 1 とピン 2 に被さっているとき、 これらのピンは 「ショート」 です。 CMOS クリアジャンパー (CLRMOS1) デフォルト CMOS のクリア (p.1、 No. 30 参照) CLRMOS1 を使って...
  • Seite 170 1.4 オンボードのヘッダーとコネクター オンボードヘッダーとコネクターはジャンパーではありません。 これらヘッダーとコネク ターにはジャンパーキャップを被せないでく ださい。 ヘッダーおよびコネクターにジャン パーキャップを被せると、 マザーボードに物理損傷が起こるこ とがあります。 システムパネルヘッダー 電源スイッチを接続し、 PLED+ PLED- (9 ピン PANEL1) スイッチをリセッ トし、 下 PWRBTN# (p.1、 No. 21 参照) 記のピン割り当てに従っ て、 シャーシのシステムス テータス表示ランプをこ RESET# HDLED- のヘッダーにセッ トしま HDLED+ す。 ケーブルを接続すると きには、 ピンの+と−に 気をつけてく ださい。 PWRBTN (電源スイッチ)...
  • Seite 171 Fatal1ty X299 Professional Gaming i9 Series 電源 LED とスピーカーヘ シャーシ電源 LED とシャー SPEAKER DUMMY ッダー シスピーカーをこのヘッ DUMMY (7 ピン SPK_PLED1) ダーに接続してく ださい。 (p.1、 No. 19 参照) PLED+ PLED+ PLED- シリアル ATA3 コネクタ これら 10 個 の SATA3 コネクタ ー は、 最高 6.0 Gb/s のデータ転送 速度で内部ストレージデバイス...
  • Seite 172 (19 ピン USB3_7_8) Vbus Vbus Vbus IntA_PB_SSRX- (p.1、 No. 11 参照) IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy フロントパネルタイプ C このマザーボード上には、 USB 3.1 ヘッダー 1 つのフロントパネルタイ (26 ピン USB31_TC_2) プ C USB 3.1 ヘッダーが (p.1、 No. 12 参照) あります。...
  • Seite 173 Fatal1ty X299 Professional Gaming i9 Series シャーシファンコネクタ ファンケーブルはファン (4 ピン CHA_FAN1) コネクターに接続し、 黒線 (p.1、 No. 20 参照) とアースピンを合わせて FAN_SPEED_CONTROL CHA_FAN_SPEED (4 ピン CHA_FAN2) く ださい。 FAN_VOLTAGE (p.1、 No. 32 参照) シャーシ (オプション) / ウ このマザーボードには、 2 ォーターポンプファンコ つの 4 ピン水冷シャーシ ネクタ...
  • Seite 174 ATX 12V 電源コネクター このマザーボードは 8 ピン (8 ピン ATX12V1) ATX12V 電源コネクターが (p.1、 No. 3 参照) 装備されています。 4 ピンの ATX 電源を使用するには、 ピン 1 と 5 番に合わせて接 続してく ださい。 TPM ヘッダー このコネクターはトラステッ ドプ (17 ピン TPMS1) ラッ トフォームモジュール (TPM) (p.1、 No. 27 参照) システムをサポートし、...
  • Seite 175 Fatal1ty X299 Professional Gaming i9 Series CPU ヘッダー上の仮想 このコネクタは、 CPU 上の Intel® 仮想 RAID および CPU PCIE 上 RAID +3VSB (4 ピン VROC1) の NVME/AHCI RAID に対応し (p.1、 No. 10 参照) ます。 VROC RAID KEY...
  • Seite 176 1.5 スマートスイッチ このマザーボードには 4 つのスマートスイッチが装備されています : 電源スイッ チ、 リセッ トスイッチ、 クリア CMOS スイッチ、 BIOS フラッシュバックスイッチにより、 システムを素早く ON/OFF したり、 システムをリセッ トしたり、 CMOS 値をク リアし たり、 BIOS をフラッシュしたりするこ とができます。 電源スイッチ 電源スイッチで、 システム を素早く オン / オフにで (PWRBTN) Power (p.1、 No. 23 参照) きます。...
  • Seite 177 由于主板规格和 BIOS 软件可能已更新,因此,本文档的内容可能会随时更改,恕不 另行通知。如果本文档有任何修改,则更新的版本将发布在华擎网站上,我们不会另 外进行通知。如果您需要与此主板相关的技术支持,请访问我们的网站以具体了解所 用型号的信息。您也可以在华擎网站上找到最新 VGA 卡和 CPU 支持列表。华擎网站 http://www.asrock.com。 1.1 包装清单 • 华擎 Fatal1ty X299 Professional Gaming i9 Series 主板(ATX 规格尺寸) • 华擎 Fatal1ty X299 Professional Gaming i9 Series 快速安装指南 • 华擎 Fatal1ty X299 Professional Gaming i9 Series 支持光盘...
  • Seite 178 • 支持 DDR4 4400+(OC)*/4266(OC)/4133(OC)/4000(OC)/ 3866(OC)/3800(OC)/3733(OC)/3600(OC)/3200(OC)/2933(OC)/ 2800(OC)/2666/2400/2133 非 ECC,非缓冲内存 * 支持的最大内存频率可能根据处理器类型而变化。 * 请参阅华擎网站上的 Memory Support List(内存支持列表)了 解详情。(http://www.asrock.com/) • 支持非 ECC RDIMM(寄存型 DIMM) • 支持系统内存最大容量: 128GB • 支持 Intel® Extreme Memory Profile (XMP) 2.0 • DIMM 插槽中 15μ 金触点 • 4 x PCI Express 3.0 x16 槽 * 扩充槽...
  • Seite 179 Fatal1ty X299 Professional Gaming i9 Series • 支持 AMD Quad CrossFireX 、3 向 CrossFireX 和 CrossFireX ** 仅 44 通道或 28 通道的 CPU 支持 3-Way CrossFireX 。 • 支持 NVIDIA® Quad SLI 、3-Way SLI 和 SLI *** 仅 44 通道或 28 通道的 CPU 支持此功能。 • 1 x 垂直...
  • Seite 180 无线 LAN • Intel® 802.11ac WiFi 模块(免费捆绑) • 支持 IEEE 802.11a/b/g/n/ac • 支持双频段 (2.4/5 GHz) • 支持最高 433Mbps 的高速无线连接 • 支持 Bluetooth 4.2 / 3.0 + 高速 Class II 后面板 I/O • 2 x 天线端口 • 1 x PS/2 鼠标 / 键盘端口 • 1 x 光学...
  • Seite 181 Fatal1ty X299 Professional Gaming i9 Series ** 支持 NVMe SSD 用作启动盘 ** 支持华擎 U.2 套件 • 1 x CPU 接脚上虚拟 RAID 接口 • 1 x TPM 接脚 • 1 x 电源 LED 和扬声器接脚 • 2 x RGB LED 接头 * 支持最高 12V/3A, 36W LED 灯条 • 1 x CPU 风扇接口...
  • Seite 182 CPU 可选 / 水泵、机箱、机箱可选 / 水泵风扇 • 风扇多种速度控制 : CPU、CPU 可选 / 水泵、机箱、机箱可 选 / 水泵风扇 • 电压监控: +12V、+5V、+3.3V、CPU Vcore、DRAM、PCH 1.0V、VCCIO、VCCSA、VCCSFR • Microsoft® Windows® 10 64-bit 操作系统 • FCC、CE 认证 • ErP/EuP 支持(需要支持 ErP/EuP 的电源) * 有关详细产品信息,请访问我们的网站: http://www.asrock.com 须认识到超频会有一定风险,包括调整 BIOS 设置,应用“自由超频技术”,或使用 第三方超频工具。超频可能会影响到系统的稳定性,甚至对系统的组件和设备造成损 坏。执行这项工作您应自担风险和自己承担费用。我们对由于超频而造成的损坏概不 负责。...
  • Seite 183 Fatal1ty X299 Professional Gaming i9 Series 1.3 跳线设置 此图显示如何设置跳线。将跳线帽装到这些针脚上时,跳线 “短接”。如果这 些针脚上没有装跳线帽,跳线 “开路”。此图显示 3 针跳线,当跳线帽装在针 脚 1 和针脚 2 上,它们“短接”。 清除 CMOS 跳线 (CLRMOS1) 清除 CMOS 默认 ( 见第 1 页,第 30 个 ) CLRMOS1 允许您清除 CMOS 中的数据。要清除和重置系统参数到默认设 置,请关闭计算机,从电源上拔下电源线插头。等候 15 秒后,使用跳线帽将 CLRMOS1 上的针脚...
  • Seite 184 1.4 板载接脚和接口 板载接脚和接口不是跳线。不要将跳线帽装到这些接脚和接口上。将跳线帽装到这些 接脚和接口上将会对主板造成永久性损坏。 系统面板接脚 按照下面的针脚分配,将 PLED+ PLED- (9 针 PANEL1) PWRBTN# 机箱上的电源开关、重置 ( 见第 1 页, 第 21 个 ) 开关和系统状态指示灯连 接到此接脚。在连接线缆 RESET# 前请记下正负针脚。 HDLED- HDLED+ PWRBTN(电源开关): 连接到机箱前面板上的电源开关。您可以配置使用电源开关关闭系统的方式。 RESET(重置开关): 连接到机箱前面板上的重置开关。如果计算机死机,无法执行正常重新启动,按重置 开关重新启动计算机。 PLED(系统电源 LED): 连接到机箱前面板上的电源状态指示灯。系统操作操作时,此 LED 亮起。系统处在 S1/S3 睡眠状态时,此 LED 闪烁。系统处在 S4 睡眠状态或关机 (S5) 时,此 LED 熄灭。 HDLED(硬盘活动...
  • Seite 185 Fatal1ty X299 Professional Gaming i9 Series 电源 LED 和扬声器接脚 请将机箱电源 LED 和机 SPEAKER DUMMY (7 针 SPK_PLED1) 箱扬声器连接到此接脚。 DUMMY ( 见第 1 页,第 19 个 ) PLED+ PLED+ PLED- 串行 ATA3 接口 这十个 SATA3 接口支持最高 6.0 (SATA3_0_1: Gb/s 数据传输速率的内部存储 见第 1 页, 第 14 个 ) 设备的...
  • Seite 186 (19 针 USB3_7_8) Vbus Vbus Vbus IntA_PB_SSRX- ( 见第 1 页,第 11 个 ) IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy 前面板类型 C USB 3.1 接 此主板上有一个前面板 类型 C USB 3.1 接脚。此 脚 (26- 针 USB31_TC_2) 接脚用于连接...
  • Seite 187 Fatal1ty X299 Professional Gaming i9 Series 机箱风扇接口 请将风扇线连接到风扇 (4 针 CHA_FAN1) 接口并使黑线匹配接地 ( 见第 1 页, 第 20 个 ) FAN_SPEED_CONTROL 针脚。 CHA_FAN_SPEED (4 针 CHA_FAN2) FAN_VOLTAGE ( 见第 1 页, 第 32 个 ) 机箱可选 / 水泵风扇接 此主板提供两个 4 针水 口...
  • Seite 188 ATX 12V 电源接口 此主板提供 8 针 ATX (8 针 ATX12V1) 12V 电源接口。要使用 4 ( 见第 1 页,第 3 个 ) 针 ATX 电源,请沿针脚 1 和针脚 5 插接它。 TPM 接脚 此接口支持 Trusted Platform (17 针 TPMS1) Module(信任平台模块, ( 见第 1 页,第 27 个 ) TPM)系统,可以安全地存储...
  • Seite 189 Fatal1ty X299 Professional Gaming i9 Series 1.5 智能开关 此主板配有 4 个智能开关: 电源开关、重置开关、清除 CMOS 开关和一个 BIOS 回闪开关,允许用户快速开启 / 关闭系统、重置系统、清除 CMOS 值或 刷新 BIOS。 电源开关 电源开关允许用户快速 (PWRBTN) 打开 / 关闭系统。 Power ( 见第 1 页,第 23 个 ) 重置开关 重置开关允许用户快速 (RSTBTN) Reset 重置系统。...
  • Seite 190 电子信息产品污染控制标示 依据中国发布的「电子信息产品污染控制管理办法」及 SJ/T 11364-2006「电子 信息产品污染控制标示要求」,电子信息产品应进行标示,藉以向消费者揭露 产品中含有的有毒有害物质或元素不致发生外泄或突变从而对环境造成污染或 对人身、财产造成严重损害的期限。依上述规定,您可于本产品之印刷电路板 上看见图一之标示。图一中之数字为产品之环保使用期限。由此可知此主板之 环保使用期限为 10 年。 图一 有毒有害物质或元素的名称及含量说明 若您欲了解此产品的有毒有害物质或元素的名称及含量说明,请参照以下表格 及说明。 有害物质或元素 部件名称 铅 (Pb) 镉 (Cd) 汞 (Hg) 六价铬 (Cr(VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 印刷电路板 及电子组件 外部信号连 接头及线材 O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定 的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准 规定的限量要求,然该部件仍符合欧盟指令...
  • Seite 191 優異效能,完全符合華擎對品質及耐用度的承諾。 由於主機板規格及 BIOS 軟體可能會更新,所以本文件內容如有變更,恕不另行通知。 如本文件有任何修改,可至華擎網站逕行取得更新版本,不另外通知。若您需要與本 主機板相關的技術支援,請上我們的網站瞭解有關您使用機型的特定資訊。您也可以 在華擎網站找到最新的 VGA 卡及 CPU 支援清單。華擎網站 http://www.asrock.com。 1.1 包裝內容 • 華擎 Fatal1ty X299 Professional Gaming i9 Series 主機板(ATX 尺寸) • 華擎 Fatal1ty X299 Professional Gaming i9 Series 快速安裝指南 • 華擎 Fatal1ty X299 Professional Gaming i9 Series 支援光碟...
  • Seite 192 • 支援 DDR4 4400+(OC)*/4266(OC)/4133(OC)/4000(OC)/ 3866(OC)/3800(OC)/3733(OC)/3600(OC)/3200(OC)/2933(OC)/ 2800(OC)/2666/2400/2133 非 ECC、無緩衝記憶體 * 支援的最大記憶體頻率可能根據處理器類型而有不同。 * 如需更多資訊,請參閱華擎網站上的記憶體支援表。 (http://www.asrock.com/) • 支援非 ECC RDIMM (Registered DIMM) • 最大系統記憶體容量: 128GB • 支援 Intel® Extreme Memory Profile (XMP) 2.0 • 15μ 特厚鍍金插槽 • 4 x PCI Express 3.0 x16 插槽 * 擴充插槽...
  • Seite 193 Fatal1ty X299 Professional Gaming i9 Series • 支援 AMD Quad CrossFireX 、3-Way CrossFireX 及 CrossFireX ** 僅 44 或 28 條通道的 CPU 支援 3-Way CrossFireX 。 • 支援 NVIDIA® Quad SLI 、3-Way SLI 及 SLI *** 僅 44 或 28 條通道的 CPU 支援此功能。 • 1 x 垂直...
  • Seite 194 • Intel® 802.11ac WiFi 模組 ( 免費搭售 ) 無線 LAN • 支援 IEEE 802.11a/b/g/n/ac • 支援雙頻 (2.4/5 GHz) • 支援高達 433Mbps 的高速無線連線 • 支援 Bluetooth 4.2 / 3.0 + 高速級別 II • 2 x 天線連接埠 後面板 I/O • 1 x PS/2 滑鼠/鍵盤連接埠 • 1 x 光纖...
  • Seite 195 Fatal1ty X299 Professional Gaming i9 Series ** 支援 Intel® Optane 技術 (M2_2, M2_3) ** 支援 NVMe SSD 作為開機磁碟 ** 支持華擎 U.2 套件 • 1 x Virtual RAID On CPU 排針 接頭 • 1 x TPM 排針 • 1 x 電源 LED 及喇叭排針 • 2 x RGB LED 排針...
  • Seite 196 • 靜音風扇(依 CPU 溫度自動調整機殼風扇速度): CPU、 CPU 選購/水冷幫浦、機殼、機殼選購/水冷幫浦風扇 • 風扇多重速度控制: CPU、CPU 選購/水冷幫浦、機殼、機 殼選購/水冷幫浦風扇 • 電壓監控: +12V、+5V、+3.3V、CPU Vcore、DRAM、PCH 1.0V、VCCIO、VCCSA、VCCSFR • Microsoft® Windows® 10 64-bit 作業系統 • FCC、CE 認證 • ErP/EuP ready(須具備 ErP/EuP ready 電源供應器) * 如需產品詳細資訊,請上我們的網站: http://www.asrock.com 請務必理解,超頻可能產生某種程度的風險,其中包括調整 BIOS 中的設定、採用自 由超頻技術或使用協力廠商的超頻工具。超頻可能會影響您系統的穩定性,或者甚至 會對您系統的元件及裝置造成傷害。您應自行負擔超頻風險及成本。我們對於因超頻 所造成的可能損害概不負責。...
  • Seite 197 Fatal1ty X299 Professional Gaming i9 Series 1.3 跳線設定 圖例顯示設定跳線的方式。當跳線帽套在針腳上時,該跳線為「短路」。若沒 有跳線帽套在針腳上,該跳線為「開啟」。圖例顯示當 3-pin 跳線的跳線蓋套 在 pin1 及 pin2 時,這兩個針腳皆為「短路」。 清除 CMOS 跳線 (CLRMOS1) ( 請參閱第 1 頁,編號 30) 清除 CMOS 預設 您可利用 CLRMOS1 清除 CMOS 中的資料。若要清除及重設系統參數為預設 設定,請先關閉電腦電源,再拔下電源供應器的電源線。在等待 15 秒後, 請使用跳線帽讓 CLRMOS1 上的 pin2 及 pin3 短路約 5 秒。不過,請不要在更 新...
  • Seite 198 1.4 板載排針及接頭 板載排針及接頭都不是跳線。請勿將跳線帽套在這些排針及接頭上。將跳線帽套在排 針及接頭上,將造成主機板永久性的受損。 系統面板排針 請依照以下的針腳排列 PLED+ PLED- (9-pin PANEL1) PWRBTN# 將機殼上的電源開關、 ( 請參閱第 1 頁, 編號 21) 重設開關及系統狀態指 示燈連接至此排針。在 RESET# 連接纜線之前請注意正 HDLED- 負針腳。 HDLED+ PWRBTN ( 電源開關 ): 連接至機殼前面板上的電源開關。您可設定使用電源開關關閉系統電源的方式。 RESET ( 重設開關 ): 連接至機殼前面板上的重設開關。若電腦凍結且無法執行正常重新啟動,按下重設開 關即可重新啟動電腦。 PLED ( 系統電源 LED): 連接至機殼前面板上的電源狀態指示燈。系統正在運作時,此...
  • Seite 199 Fatal1ty X299 Professional Gaming i9 Series 電源 LED 及喇叭排針 請將機殼電源 LED 及機 SPEAKER DUMMY (7-pin SPK_PLED1) 殼喇叭連接至此排針。 DUMMY ( 請參閱第 1 頁,編號 19) PLED+ PLED+ PLED- Serial ATA3 接頭 這十組 SATA3 接頭皆支援內部 (SATA3_0_1: 儲存裝置的 SATA 資料纜線, 請參閱第 1 頁,編號 14) 最高可達...
  • Seite 200 (19-pin USB3_7_8) Vbus Vbus Vbus IntA_PB_SSRX- ( 請參閱第 1 頁,編號 11) IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D- IntA_PA_D- IntA_PB_D+ IntA_PA_D+ Dummy 前面板 C 類型 USB 3.1 排針 本主機板具有一 (26-pin USB31_TC_2) 個前面板 C 類型 ( 請參閱第 1 頁,編號 12) USB 3.1 排針。...
  • Seite 201 Fatal1ty X299 Professional Gaming i9 Series 機殼風扇接頭 請將風扇纜線連接至 (4-pin CHA_FAN1) 風扇接頭,並比對黑 ( 請參閱第 1 頁, 編號 20) FAN_SPEED_CONTROL 線及接地針腳。 CHA_FAN_SPEED (4-pin CHA_FAN2) FAN_VOLTAGE ( 請參閱第 1 頁, 編號 32) 機殼選購/水冷幫浦風扇接頭 本主機板配備兩個 (4-pin CHA_FAN3/W_PUMP) 4-Pin 水冷機殼風扇接 ( 請參閱第 1 頁, 編號 24) 頭接頭。若您計畫連...
  • Seite 202 ATX 12V 電源接頭 本主機板配備一組 8-pin (8-pin ATX12V1) ATX 12V 電源接頭。若 ( 請參閱第 1 頁,編號 3) 要使用 4-pin ATX 電源 供應器,請插入 Pin 1 及 Pin 5。 TPM 排針 此接頭支援信賴平台模組 (17-pin TPMS1) (TPM) 系統, 可確保儲存金鑰、 ( 請參閱第 1 頁,編號 27) 數位憑證、 密碼及資料的安全。 TPM 系統也能強化網路安全、...
  • Seite 203 Fatal1ty X299 Professional Gaming i9 Series Virtual RAID On CPU 排針 此接頭支援 Intel® Virtual RAID (4-pin VROC1) on CPU 及 NVME/AHCI RAID +3VSB ( 請參閱第 1 頁,編號 10) on CPU PCIE。 VROC RAID KEY...
  • Seite 204 1.5 智慧型開關 主機板設有四個智慧型開關: 電源開關、重設開關、清除 CMOS 開關及一 個 BIOS Flashback 開關,可讓使用者迅速開啟/關閉系統、重設系統、清除 CMOS 值或更新 BIOS。 電源開關 電源開關可讓使用者迅速開啟 Power (PWRBTN) /關閉系統。 ( 請參閱第 1 頁,編號 23) 重設開關 重設開關可讓使用者迅速重設 (RSTBTN) Reset 系統。 ( 請參閱第 1 頁,編號 22) 清除 CMOS 開關 清除 CMOS 開關可讓使用者 (CLRCBTN) 迅速清除...
  • Seite 205 2800(OC)/2666/2400/2133 non-ECC, memori tanpa bufer * Frekuensi memori maksimum yang didukung dapat bervariasi berdasarkan tipe prosesor. * Lihat Daftar Dukungan Memori pada situs web ASRock untuk informasi selengkapnya. (http://www.asrock.com/) • Mendukung non-ECC RDIMM (DIMM Terdaftar) • Kapasitas maksimum memori sistem: 128GB • Mendukung Intel®...
  • Seite 206 • Audio HD 7.1 CH dengan Perlindungan Konten (Realtek ALC1220 Audio Codec) • Mendukung Audio Blu-ray Premium • Mendukung Perlindungan Lonjakan Arus (ASRock Full Spike Protection) • Nichicon Fine Gold Series Audio Caps • 120dB SNR DAC dengan Amplifier Diferensial • TI®...
  • Seite 207 * Daya USB Ultra didukung pada port USB3_12. * Fungsi pengaktifan ACPI tidak didukung pada port USB3_12. • 4 x Port USB 3.0 (Mendukung Perlindungan ESD (ASRock Full Spike Protection)) • 3 x Port LAN RJ-45 dengan LED (ACT/LINK LED dan SPEED LED) • 1 x Sakelar BIOS Flashback...
  • Seite 208 PCI Express hingga Gen3 x4 (32 Gb/s)** ** Mendukung Teknologi Intel® Optane (M2_2, M2_3) ** Mendukung SSD NVMe sebagai disk boot ** Mendukung Kit ASRock U.2 Konektor • 1 x RAID Virtual pada Header CPU • 1 x Header TPM • 1 x Header LED Daya dan Speaker...
  • Seite 209 • 2 x Header USB 2.0 (Mendukung 4 port USB 2.0) (Mendukung Perlindungan ESD (Perlindungan ASRock Full Spike)) • 2 x Header USB 3.0 (Mendukung 4 port USB 3.0) (Hub ASMedia ASM1074) (Mendukung Perlindungan ESD (ASRock Full Spike Protection)) • 1 Header USB 3.1 Tipe C pada Panel Depan (ASMedia ASM3142) * Mendukung pengisian daya USB PD 2.0 hingga 12V@3A (36W)
  • Seite 210 * Untuk informasi rinci tentang produk, kunjungi situs web kami: http://www.asrock.com Perlu diketahui, overclocking memiliki risiko tertentu, termasuk menyesuaikan pengaturan pada BIOS, menerapkan Teknologi Untied Overclocking, atau menggunakan alat bantu overclocking pihak ketiga. Overclocking dapat mempengaruhi stabilitas sistem, atau bahkan mengakibatkan kerusakan komponen dan perangkat sistem.
  • Seite 223: Contact Information

    Contact Information If you need to contact ASRock or want to know more about ASRock, you’re welcome to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer for further information. For technical questions, please submit a support request form at http://www.asrock.com/support/tsd.asp...
  • Seite 224: Ec Declaration Of Conformity

    EC-Declaration of Conformity For the following equipment: Motherboard (Product Name) Fatal1ty X299 Professional Gaming i9 Series / ASRock (Model Designation / Trade Name) ASRock Incorporation (Manufacturer Name) 2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District, Taipei City 112, Taiwan (R.O.C.)

Diese Anleitung auch für:

Fatal1ty x299 professional gaming i9 serie

Inhaltsverzeichnis