Warranty And Service; Technical Support - Jeti SPIN pro Serie Handbuch

SPIN SPIN
PRO PRO
• Before sending an inoperative controller to a service center, please check whether an incorrect
adjustment via the JETIBOX is not the source of misbehaviour. Try to use one of the preset modes
(see item 6.3).
• Be sure to provide a sufficient cooling of the controller. In case of insufficient cooling the
temperature safety guard may switch off, or in extreme conditions the controller may be damaged
irreversibly.
• Repairs of SPINpro controllers can be performed by qualified service stations only, otherways
warranty will loose its validity.

7.2 Warranty and Service

The product is furnished with a warranty of 24 months after the date of sale on the assumption that
it has been operated correctly and with the proper voltage according to these instructions and that
it does not show mechanical damage. In case of a complaint always add a purchase receipt of the
product. Warranty and post warranty repairs are carried out by the manufacturer.

7.3 Technical Support

If you are not sure to be able to provide a correct set-up and function control of your equipment by
yourself, please contact our technical support. You may find our technical support either at your
distributor or directly at the manufacturer JETI model. Please find further information on the
internet pages www.jetimodel.com .
www.modellmarkt24.ch www.modellmarkt24.ch
29
EN