Herunterladen Inhalt Inhalt Diese Seite drucken

Setting With The Help Of The Jetibox; Measure - Jeti SPIN pro Serie Handbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

SPIN
SPIN
PRO
PRO

5. Setting with the help of the JETIBOX

This setting is carried out by means of four push-buttons: left , right , up , down
Plug in the JR connector of the controller (SPIN OPTO red ending) into the plug designated Impuls + - ,
which is positioned on the right side of the JETIBOX.
Before connecting the flight battery remove for the sake of safety the propeller.
Do not connect anything to the connector designated with + -.
Connect the flight batteries and switch on the switch - receiver power suply(void for Spin11). On the
display appears the name of the connected controller. By means of the push-buttons L and R more
detailed informations are acquired of your controller.
By means of the push-button D we get to the option line of basic régimes where we either can choose
reading out of measured values or setting of controller parameters (Measure or Setting), with push-
buttons L and R we choose MEASURE–MAN. SETTING–AUTO SET.

5.1 Measure

MEASURE
D
Max.Temperature
D
Act. Temperature
D
Maximum Voltage
D
Minimum Voltage
D
Actual Voltage
D
Motor Run Time
D
Power ON Time
D
www.modellmarkt24.ch
www.modellmarkt24.ch
MEASURE – continue with push-button D
The controller registers the max. temperature during operation and the time of its
occurrence. The time measurement begins with the first revolution of the motor.
The display indicates the actual temperature.
The controller registers the max. voltage of the flight batteries beginning with the
first revolution of the motor as well as the time when this value occurred.
The controller registers the min. voltage of the flight batteries beginning with
the first revolution of the motor as well as the time when this value occurred.
Instantaneous battery voltage.
The controller registers the overall motor run time.
The controller measures the overall time from the first switch-on of the switch
(activation) until switch-off. The time is measured from the first move of the prop
(rotor).
R
L
22
EN
.
D
U

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für Jeti SPIN pro Serie

Inhaltsverzeichnis