Dorr SNAPSHOT LIMITED 5.0 S Bedienungsanleitung Seite 19

07 | CAMERA REGISTER CAM, PIR, SYS
07.1 REGISTER CAM (Camera)
07.1.1 Camera Mode
Select between photo or video shooting.
1. Press the navigation button (10) ▼to select Photo.
2. Press the navigation buttons (10) ◄ or ► to select Video.
3. Save with OK button (11).
Video quality 640 x 480 Pixels (not changeable)
Video length 10 seconds (not changeable)
07.1.2 Photo Size
Select between 3 MP or 5 MP picture resolution.
1. Press the navigation button (10) ▼to select 5 MP.
2. Press the navigation buttons (10) ◄ or ► to select 3 MP.
3. Save with OK button (11).
07.2.3 Photo Burst
Set the number of pictures that are shot upon motion/per triggering . Choose from 1 up to 3 images.
1. Press the navigation button (10) ▼to select 1 Photo.
2. Press the navigation buttons (10) ◄ or ► to select 2 Photos or 3 Photos.
3. Save with OK button (11).
07.2 REGISTER PIR (Motion Sensor)
07.2.1 Sensitivity
Choose the sensitivity of the PIR motion sensor or turn the sensor off.
1. Press the navigation button (10) ▼to select Normal.
2. Press the navigation buttons (10) ◄ or ► to select High / Off or Low.
3. Save with OK button (11).
07.2.2 Trigger Interval
Set a pause for the PIR Sensor . During this pause no images are triggered upon motion detection. This setting prevents the camera
from taking too many images/videos. Setting from 5 seconds to 60 minutes.
Example with setting 20 Min.:
After triggering, the camera sets the PIR inactive for 20 minutes. After the time set the PIR sensor will be active again.
1. Press the navigation button (10) ▼to select
2. Press the navigation buttons (10) ◄ or ► to select
3. Save with OK button (11).
19
1 Min .
desired duration .
doerr-outdoor.de