How To Install The Product; Mounting The Product On A Wall; Using The Ventilation On Top Of The Product (Vertical Ventilation) - VESTEL VHUE60DX Bedienungsanleitung

4.2

How to install the product

4.2.1

Mounting the product on a wall

4.2.1.1 Using the ventilation on top of the product (vertical ventilation)

Tools required:
• Pencil
• Drill (8mm)
• Crosshead screwdriver
• Hammer
To install the product:
1. Make sure that the power cable is disconnected from the wall socket.
2. Determine the position of the four holes on the wall. NOTICE The minimum
distance between the supporting surface of the cooking appliance and the
lowest part of the cooker hood must be:
a. Gas cookers:
b. Electric cookers:
c. Coal or oil cookers
3. Drill the four holes in the wall with the 8 mm drill.
4. Insert the four wall plugs.
5. Place two ST4 x 30mm screws in the two upper wall plugs.
6. Put the cooker hood on the two screws.
7. Use the other two ST4 x 30mm screws to attach the cooker hood to the wall.
Tighten the screws.
45 | VESTEL VHUE60DX
70 cm
70 cm
80 cm