Device-Specific Safety Instructions - Collomix CMG 2600 Originalbetriebsanleitung

Device-specific safety instructions

WARNING:
Hazard-free working conditions can only be ensured
if the operating manual and the safety instructions
have been read in their entirety, and if all instruc-
tions are strictly adhered to. The machine must only
be operated by personnel familiar with the oper-
ating manual and the applicable health and safety
regulations.
Store all safety notes and instructions in a safe loca-
tion for future reference.
The additionally attached "General Safety In-
structions" must be strictly complied with.
This power tool is to be used for the purpose of
grinding. Comply with all safety notes, instruc-
with the device. Non-compliance with the follow-
and/or severe injury.
This power tool is not suitable for: sand paper
grinding, tasks involving wire brushes, polishing
tool is not intended may result in hazards and in-
jury.
cally designed for this power tool or has not been
recommended by the manufacturer. The fact that
you may be able to mount accessory to the power
tool does not mean that its safe use is guaranteed.
sert must be at least as high as the max. speed
stated on the power tool. Any accessory that
rotates at a higher speed that permissible, may
The outer diameter of the tool insert must match
the measurements provided for your power tool.
Incorrectly dimensioned tool inserts can not be
appropriately shielded or controlled.
onto the grinding spindle of your power tool.
ing spindle of your power tool will rotate uneven-
ly, will vibrate severely, and may result in a loss of
control over the power tool.
Never use damaged tool inserts. Check the dia-
mond cup wheel for cracks, wear or deforma-
or tool insert must be checked for any damage;
never work with damaged tools. Once you have
checked and inserted the tool insert, ensure that
you and other personnel in the immediate vicin-
insert, while running it at max. speed for one
minute. Damaged or faulty tool inserts will usu-
apron to protect you from small grinding or mate-
treme noise levels may result in a loss of hearing.
Ensure that other personnel in the vicinity remain
at a safe distance to your work area. Any person-
nel entering the work area must be wearing rel-
evant PPE. Workpiece debris or broken tool inserts
work area.
Only touch the power tool at its insulated grips
when carrying out tasks in which the tool inserts
could compromise hidden power lines or the
power tool's own power cable. Contact with a
live line will conduct electricity through the metal
parts of the power tool and may result in electro-
serts. Should you lose control of the power tool,
then the power cable could be cut or snared, and
-
power tool.
ing tool insert could come into contact with the
storage surface, which could result in a loss of con-
-
trol over the power tool.
clothing could accidentally be snared by the rotat-
ing tool insert and result in physical injury.
Clean the air vents of your power tool regularly.
The motor blower draws dust into the housing,
electrical hazards.
Do not operate the power tool in close proximity
-
Do not use tool inserts that require liquid cool-
ant. The use of water or other liquid coolants may
disks that are not designed for use with this power
safe.
mounted on the power tool securely. The protec-
Rev. 3 / 11
Prolonged exposure to ex-
he rotat-
Your
Flying sparks could result
Grinding
-
-
-
-
-
-