Use In Accordance With Specifications; Working Rules; Scope Of Delivery - KULZER Technomat Betriebsanleitung

Work on the device must be carried out only by Kulzer or Kulzer service partners and when the equipment is in a safe
status. Only use authorised original spare parts and accessories. Avoid other parts as they hide unknown risks.
The operability and safety of the device is only guaranteed if the necessary maintenance and repair work is carried out by
Kulzer or Kulzer service partners.
For possible damage coming from a fault / malfunction of the device due to improper repair, which was not carried out by
Kulzer or Kulzer service partners or in cases where original spare / accessory parts were not used during a part replace-
ment, Kulzer GmbH is not liable.
3

Use in accordance with specifications

The Technomat pressure polymerization device is a laboratory device for polymerizing cold-curing mounting resins for materialo-
graphic applications.
The functional design of the device is specifically matched with processing methods of fast curing Technovit resins.
The polymerization is performed at an operating pressure of 2 bars which is calibrated by an integrated pressure reduction
valve. A pressure gauge on the operating panel shows the nominal pressure after pressurization. At a pressure of more than
2.8 bars within the pressure pot the safety valve opens automatically.
3.1

Working rules

Attention!
The following must be observed when working with the device:
Do not process or use easily flammable materials, liquids or gases.
Do not use any material that causes or supports the formation of explosive mixtures.
Do not use materials and/or procedures that cause an uncontrolled volume expansion in the pressure pot.
4

Scope of delivery

1 x device, quarz timer, operating manual
1 x Compressed air hose, nozzle, hose clip
5 Description of the device
Front view
1
2
4
1) Cover
2) Pressure Pot
3) Quarz-Timer
Operating Manual
Pressure polymerization device
3
5
4) Pressure gauge
5) Valve lever
GB
- 3 -