Before The First Use; Timer Operation - TriStar AC-5560 Bedienungsanleitung

BEFORE THE FIRST USE

Before starting operations in this section:
• Find a place where there is power supply nearby.
• Install the exhaust hose, and adjust the window position well.
• Insert the power cord into an grounded AC220~240V/50Hz socket;
• Connect water pump drain hose well (only for heat pump type).
• Press the On/off button to turn on the air-conditioner.
• Operation temperature range: 18°C - 35°C
• Check whether the exhaust hose has been mounted properly.
• When using functions on cooling and dehumidifying, keep an interval
of at least 3 minutes between each power.
• Do not share one socket with other appliances.
USE
Cooling operation
• Press the "Mode" button till the "Cool" icon appears.
• Press the up or down button to select a desired room temperature.
• Press the "Fan Speed" button to select wind speed.
Dehumidifying operation
• Press the "Mode" button till the "Dehumidify Indicator Lamp" blinks
• Set the selected temperature to current room temperature minus 2
• Set the fan motor to LOW wind speed.
Heating operation (this function is not available for a cold-single unit)
• Press the "Mode" button till the "Heat" icon appears.
• Press the up or down button to select a desired room temperature.
• Press the "Fan Speed" button to select wind speed.

TIMER OPERATION

Timer ON setting:
• When the air-conditioner is OFF, press the "Timer" button and select a
desired ON time through the temperature and time setting buttons.
• "Preset ON Time" is displayed on the operation panel.
• ON time can be regulated at any time in 0-24 hours.
Timer OFF setting:
• When the air-conditioner ON, press "Timer" button and select a desired
OFF time through the temperature and time setting buttons.
• "Preset OFF Time" is displayed on the operation panel.
• OFF time can be regulated at any time in 0-24 hours.
Air conditioner
EN
C.
o
5