Roto ZEL STG ZSU 24V Bedienungsanleitung Seite 59

SETTING
Prog2 END LIMIT (Time/position.programming)
Note
This dialog window will only be displayed if a time is set in PROG2.
1..You.have.confirmed.the.PROG1.END.LIMIT.menu.level..PROG2.END.LIMIT.will.
appear.
2..You.can.select.PROG.2.END.LIMIT,.PROG.2.INTERMEDIATE.POSITION.and.
PROG.2.VENTILATION/REVERSE.using.the.+/- button.
3..Confirm.your.selection.by.pressing.OK.
4..The.function.PROG2.POSITION.has.now.been.set..
5..Please read on for further programming options using the SETTING
menu.
Englisch 59