Roto ZEL STG ZSU 24V Bedienungsanleitung Seite 41

Connection as a group controller in connection with
NT24V
Attention
If the control is used as a group control device, for example, no bridge
can be inserted between the L and C terminals!
1..Connect.the.power.supply.unit.to.the.timer.24.V.(TC52).as.follows:
2..Put.the.protective.caps.back.on.the.power.supply.unit.
3..Fix.the.power.supply.unit.in.the.box.
4..Put.the.operating.device.in.the.frame.and.plug.it.into.the.power.supply.unit.
Englisch 41