Roto ZEL STG ZSU 24V Bedienungsanleitung Seite 56

PROGRAMME
PROG2/OFFSET.(e.g..Time.shutters.are.lowered.to.ventilation.position.in.the.
evening)
1..Press.the.MENU button.
2..To.select.the.PROGAMME.menu,.press.the.+.button.until.PROGAMME.ap-
pears.
3..Confirm.by.pressing.OK.
4..Press.the.+.button.until.PROG2.appears.
5..Confirm.by.pressing.OK.
6..Press.the.+.button.until.the.OFFSET.menu.appears.
7..Confirm.by.pressing.OK.
8..You. can. set. the. time. for. the. DOWN. control. command. to. be. triggered. sep-
arately. using. the. +/- button. (max.. +/-. 240. mins,. depending. on. PROG1.
SWITCHING.TIME.t)..Confirm.your.entry.by.pressing.OK.
9..Press.the.MENU button.to.switch.to.operating.mode.
Note
Using the SETTING menu level, you must enter the switching time of the
intermediate position and select PROG 2 VENTILATION for the position
of the end limits.
56 Englisch