Information For The User - Bartec MC 9060ex Serie Betriebsanleitung

Betriebsanleitung/Operation instructions UL
This information has to be attached to each device, either including it into the operating instructions or
adding it by a supplementary sheet.
Equipment that is damaged in any way or that does not function properly must instantly be
removed from the hazardous area and sent in for inspection/repair!
Substitution of components may impair intrinsic safety.
■
Change or charge battery only in an area known as non-hazardous.
■
Use Li-ion battery type 17-A1Z0-0002 only. Replace only battery with the same type. Use of another
■
battery may present a risk of fire or explosion.
Battery may explode if disposed of in fire.
■
DO NOT short circuit or disassemble battery.
■
The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not
■ ■ ■ ■ ■
disassemble, heat above 176 °F (80 °C) or incinerate.
The included battery is suitable for use only in these MC 9000
■
MC 9000 -K/MC 9060
ex
Dispose used battery promptly.
■
Keep away from children.
■
Burn hazard if mistreated. Do not disassemble. Handle damaged or leaking lithium-ion battery with
■
extreme care. If the battery is damaged, electrolyte may leak from the cells and may cause personnel
injury.
There may be local regulations or recycling of batteries. Consult your local regulations
■
or waste disposal provider.
Do not expose to high temperatures 122 °F (50 °C).
■
Do not open the equipment even outside hazardous areas! Do not modify the equipment in any
■
way. Components must not be exchanged or replaced. No additional components must be retrofitted
to internal connectors or slots.
Only the manufacturer or a person authorized and qualified for this purpose is allowed to exchange
■
keyboards.
03-0330-0419 / 240451

INFORMATION for the USER

ATTENTION
WARNINGS
CAUTION
-K Mobile Computers.
ex
-G/MC 9060 -G and
ex ex
Seite/Page 16