Device Overview; Installation - Klarstein Hot Spot Pebble Bedienungsanleitung

DEVICE OVERVIEW

Main button

INSTALLATION

Wall Installation Method
• On the wall at least 1.80 meters away from the ground, make two holes
horizontally with a hole distance of about 176 mm. Install expansion screws in the
holes to keep the nail heads slightly up and project at least 4 mm from the wall.
• Place the appliance with the air vent facing downwards, align the nail head with
the two holes on the back of the fuselage, hang it on the screw, and move the
appliance appropriately so that the wall-hanging hole of the appliance catches the
nail head so as to install it firmly.
• After the installation is completed, check the firmness first, and then turn on the
power after it is completely stable.
EN
Towel rack
fixing nut
Display screen
Operate buttons
Towel rack
(rotatable)
21