Figure 5-13: Confirmation Screen; Figure 5-14: Congratulations Screen - Cisco Systems Linksys WRE54G Benutzerhandbuch

Wireless-G Range Expander
11. You should now review the settings you've chosen. If these settings are correct, click Yes to save these
settings. If you wish to change any of the settings, click No. You will exit the Setup Wizard and can start it
again to change your settings.
12. The configuration performed with the Setup Wizard is complete. Click Online Registration to register the
Range Expander, or click Exit to exit the Setup Wizard.
To configure another Range Expander in your network, run this Setup Wizard again.
Proceed to the next section, "Moving the Range Expander."
Chapter 5: Setting Up the Wireless-G Range Expander
Running the Setup Wizard

Figure 5-13: Confirmation Screen

Figure 5-14: Congratulations Screen

15