Whirlpool T1400 Handbuch Seite 18

TS) and the phase conductors (L1, L2, L3) are black
The brightener and
The inlet
detergent containers are full
water valves
and their respective dosing
are open
units are
5.1 FIRST START UP ( BOILER AND TANK EMPTY )
Visualization
T1650-T2000-T3000-TA3000-TS2400-TS3700-TSA3700-TS4600-TSA4600
5
FIRST STARTUP ( Installer )
Before starting up the machine, make sure:
working properly
CAUTION
6
USER INSTRUCTIONS
- The overflow tubes are located correctly.
- The filters are well located.
- Curtains are correctly placed.
- The doors are closed.
What to do and what happens
In order to turn the machine on rotate the main switch
to the right on to position start. Main switch will
illuminate green. Wait for push button
green indicating tank and boiler is fill. Then turn the
boiler thermostat to 85°C
Tank temperature at 55°C and boiler temperature at
82°C are already settled by factory. To modify it please
refer to attached manual instruction.
Make sure that all motors turn in the right direction;
generally this can be taken for granted if the arrow on
the drive assembly turn in the right direction. Motor gear
must turn clock wise.
T1400/T1500
The wall switch is
turned on
to turn on
6