Inhaltsverzeichnis; Introduction; Product Description; Intended Use - Husqvarna KLIPPO LB 442 Bedienungsanweisung

Introduction..................................................................... 7
Safety..............................................................................8
Assembly...................................................................... 11
Operation...................................................................... 11
Maintenance................................................................. 12

Product description

The product is a pedestrian-controlled rotary lawn
mower that usesBioClip

Product overview

(Fig. 1)
1. Handle / handlebar
2. Engine brake handle
3. Starter rope handle
4. Drive lever (KLIPPO LB 553S e)
5. Vibration damping system (KLIPPO LB 553S e)
6. Lever for angle adjustment of the handle
7. Oil cap
8. Muffler
9. Spark plug
10. Fuel tank cap
11. Cutting height lever (KLIPPO LB 442, KLIPPO LB
448)
12. Wheel scraper (KLIPPO LB 442, KLIPPO LB 448)
13. Fuel valve
14. Cutting cover
15. Air filter
16. Drive belt
17. Gear
18. Blade support
19. Blade
20. Washer
21. Blade bolt
22. Spring washer
23. Mulch plug (KLIPPO LB 448)
24. Operator's manual
Symbols on the product
(Fig. 2) WARNING: Careless or incorrect use can
result in injury or death to the operator or
others.
(Fig. 3) Please read the operator's manual
carefully and make sure that you
understand the instructions before use.
1510 - 003 - 15.10.2020
®
to cut the grass into fertilizer.
Contents
Transportation, storage and disposal........................... 15
Technical data.............................................................. 15
EC Declaration of Conformity....................................... 17

Introduction

Intended use

Use the product to cut grass. Do not use the product for
other tasks.
(Fig. 4)
(Fig. 5)
(Fig. 6)
(Fig. 7)
(Fig. 8)
(Fig. 9)
(Fig. 10)
(Fig. 11)
Note:
Other symbols/decals on the product refer to
certification requirements for some commercial areas.
Euro V Emissions
Look out for thrown objects and ricochets.
Keep persons and animals at a safe
distance from the work area.
Stop the engine and remove the ignition
cable before repairs or maintenance.
Warning: Keep hands and feet away from
rotating parts.
Warning: Keep hands and feet away from
the rotating blade.
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to European Directive
2000/14/EC and New South Wales
legislation "Protection of the Environment
Operations (Noise Control) Regulation
2017". Noise emission data can be found
on the machine label and in the Technical
data chapter.
Scannable code.
WARNING:
Tampering with the engine
voids the EU type-approval of this product.
7