Jumper Settings - Exsys EX-1189HMVS-3 Anleitung

English
3. Layout, Connections & Jumper Settings

3.3 Jumper Settings

The EX-1189HMVS-3 will be delivered with the setting Bus-Power.
possibility to cut the power at the data line.
screws on both sides. Then you must set the jumper JP2 from ENA (Enable) to DIS
(Disable). See the following picture.
© Copyright 2020 by EXSYS Vertriebs GmbH. All Rights Reserved
For this you open the case with the four
ENA
JP2
DIS
12
EX-1189HMVS-3
But you have the