Wiring Guide - Samson MIXPAD MXP124 Bedienungsanleitung

Wiring Guide

There are several ways to interface the MXP mixer to support a variety of appli-
cations. Follow the cable diagrams below for connecting your mixer.
RCA
Pin 2 (hot)
Pin 3 (cold)
Pin 1 (shield)
Tip (+Signal)
Sleeve (ground)
Tip (signal)
Sleeve (ground)
Unbalanced ¼" Connector
Pin 2 (hot)
Male XLR
Pin 1 (shield)
Pin 3 (cold)
Balanced ¼" Connector
Pin 2 (hot)
Male XLR
Pin 1 (shield)
Pin 3 (cold)
18
Male XLR
Ring (-Signal)
Balanced ¼" Connector
Unbalanced ¼" Connector
Shield & Cold to Sleeve
Shield & Cold to Sleeve
Hot to Tip
Shield & Cold to Sleeve
Tip to Tip
Sleeve & Ring to Sleeve
Tip to Tip
Sleeve to Sleeve
Hot to Tip
Hot to Tip
Tip (signal)
Sleeve (ground)
Tip (signal)
Sleeve (ground)
Tip (signal)
Sleeve (ground)
Tip (signal)
Sleeve (ground)
Tip (+Signal)
Ring (-Signal)
Sleeve (ground)