Philips Avent SCF355 Bedienungsanleitung Seite 12

ENGLISH
12
Note: The indicated warming times are based on Philips AVENT Classic and
Natural PP bottle ranges. Be aware that warming timings of Philips AVENT
standard bottles and glass bottles deviate from these indications.
Note: The indicated defrosting times are based on Philips AVENT food containers.
Note: Due to the high variety of baby food consistencies, it is not possible to
indicate warming timings for baby food.
Note: The food or milk may feel cool to you, but for a newborn baby its
temperature is very pleasant.
Cleaning and descaling
Cleaning
1 After each use, unplug the bottle warmer and let it cool
down (Fig. 12).
2 Remove the water from the bottle warmer for hygienic
reasons (Fig. 13).
3 Wipe the outside and inside of the bottle warmer with a moist
cloth (Fig. 14).
Do not use abrasive, anti-bacterial cleaning agents, chemical solvents or
sharp tools to clean the bottle warmer.
Note: If you used the bottle warmer to warm containers with baby food, make
sure that no spilled baby food remains on the bottom of the bottle warmer.
Descaling
It is recommended to descale the bottle warmer every four weeks to
ensure it continues to work efficiently.
1 Mix 10 grams of citric acid with 200ml/7oz of cold water and pour
it into the bottle warmer. Switch on the bottle warmer and select
the milk warming setting for contents under 180ml/6oz for
10 minutes. Leave the solution in the bottle warmer until all
limescale has dissolved. You can purchase citric acid (SCF943) at
www.shop.philips.com/service. (Fig. 15)